Welding machine IM 240-i | USA
Please log in to see prices
Available in 14 days, delivery time 2-5 days
Product information "Welding machine IM 240-i | USA"
The IM 240-i welding machine is a compact MIG-MAG welding inverter specially developed for car body repairs. A unique advantage is the excellent MIG soldering characteristic. The very good steel welding characteristics enable all types of repairs to be carried out on vehicles with very good results.
Equipped with:
1 x 337219 Wire feed rollers | steel | 0.6 mm & 0.8mm
1 x 308103 Torch Force 200 | Steel welding | 3.0 m
1 x Ground cable | 4 m
1 x Operating instructions
The USA version is supplied with cable but without plug.
| Current setting range: | 20 - 200 A |
|---|---|
| Effectiveness: | 85 % |
| Fuse: | 16 A (slow) |
| Length × width × height: | 900 x 500 x 840 mm |
| Mains voltage: | 2 ~ 200 V |
| Mark of conformity: | CE |
| Open circuit voltage: | 40,2 V |
| Operating temperature: | -10 bis 40 °C |
| Power factor: | 0,75 |
| Protection class: | IP 23 |
| Voltage setting range: | 10 - 35 V |
| Weight: | 40 kg |
| Wire speed range: | 1,5 - 15 m/min |
Ähnliche Artikel
The IM 240-i welding machine is a compact MIG-MAG welding inverter specially developed for car body repairs. A unique advantage is the excellent MIG soldering characteristic. The very good steel welding characteristics enable all types of repairs to be carried out on vehicles with very good results.Equipped with: 1 x 337219 Wire feed rollers | steel | 0.6 mm & 0.8mm 1 x 308103 Torch Force 200 | Steel welding | 3.0 m 1 x Ground cable | 4 m 1 x Operating instructions
Please log in to see prices
Zubehör
Torch hanger for securing three torches. Suitable for the InvertaPuls and IM 240 machines.
Please log in to see prices
Wire feed rollers with 37 mm diameter for wire diameters of 0.6 mm and 0.8 mm.
Please log in to see prices
Wire feed rollers with 37 mm diameter for wire diameters of 0.8 mm and 1.0 mm.
Please log in to see prices
Wire feed rollers with 37 mm diameter for wire diameters of 1.0 mm and 1.2 mm.
Please log in to see prices
Suitable for welding torches MB 15, MB 24, MB 25, MB 26, 3G, Force 155, Force 200. Scope of delivery 2x ALU nozzles | Ø 1.0 mm2x ALU nozzles | Ø 1.2 mm2x Steel/MIG nozzles | Ø 0.8 mm2x Steel/MIG nozzles | Ø 1.0 mm2x Steel/MIG nozzles | Ø 0.6 mm
Please log in to see prices
Durable gloves made from thick, oil- and water-resistant cowhide leather with a textured surface. Padded back for added protection, unlined inside for better grip, and reinforced with 4-fold Kevlar stitching for durability and strength. With a length of 36 cm, these gloves also offer protection for the forearm.Size XL
Please log in to see prices
The automatic welding helmet P850 is ideal for those seeking a reliable and aesthetically pleasing product. The helmet features two sensors for automatic darkening and allows for external adjustment of the protection level according to DIN standards. Equipped with True Color Technology, the helmet provides a clear and sharp view, making it easier for the welder to identify objects in the work area and reducing fatigue. Thanks to the external regulation, the welder can effortlessly switch to grinding mode (GRIND) without having to remove the helmet.
Please log in to see prices
This welding helmet with modern sensor technology and automatic dimming has an extra wide and well-padded headband. This increases wearing comfort and noticeably reduces fatigue. Each welding helmet contains two built-in button cells. The following product features make our welding helmet particularly valuable.Product features • Extra large viewing window 97 x 60 mm • Excellent reaction time of 1/20,000 seconds • Variable darkening protection in steps from 9 to 13 • Fine adjustment of the optics sensitivity • 4 independent arc sensors • Power-saving automatic switch-off - Auto-ON /Auto-OFF • Quick and easy replacement of the filter protection screens
Please log in to see prices
Mobile welding protection screen with a slat length of 1800 mm for flexible use.
Please log in to see prices
Trennfix the silicone-free welding protection spray is an extremely efficient separating and lubricating agent. It prevents the rapid clogging of welding torches due to weld spatters on gas and power nozzles.
Please log in to see prices
This silicone-free gas nozzle protection paste prevents the rapid clogging of welding torches due to welding spatter on gas and power nozzles.
Please log in to see prices
This gas flow meter is used for precise measurement of the flow rate of argon and CO2. It is very accurate and provides precise results for gas volume metering.
Please log in to see prices
Ground clamp with copper braiding without ground cable. A crucial component in MIG-MAG welding. Only a clean and perfect ground clamp ensures a trouble-free and stable arc.
Please log in to see prices
MIG and MAG torch holder with magnetic foot.
Please log in to see prices
Special pliers with 4 functions for power nozzles with a diameter of 12 - 15 mm.• Fast and precise trimming of the welding wire• Time-saving cleaning of the shielding gas nozzle• Removal of the shielding gas nozzle• Loosening and tightening of the power nozzle
Please log in to see prices
Compact 13-piece nozzle cleaning needle set in a practical, hinged metal box. Contains approx. 90 mm long needle files (0.4-1.6 mm) and a flat file - ideal for cleaning oxyfuel welding nozzles. Scope of delivery: - 13 needles and 1 flat file- robust blue aluminum box
Please log in to see prices
One-piece adapter for basket wire coils K300 with eight arms and two closing levers.
Please log in to see prices
Two-piece adapter with quick-release for K300 basket wire coils.
Please log in to see prices
The centring adapter set is used to align the D200 wire coils on the spool mandrel so that the wire can run straight into the wire inlet.
Please log in to see prices
4-row hand wire brush made of stainless steel.
Please log in to see prices
Hand wire brush with a wire diameter of 0.35 mm. Thanks to its V-shape, this brush is ideal for cleaning, scrubbing, and rust removal in fillet welds and V-seams.
Please log in to see prices
The car body stripper is a special tool that was developed for dismantling work in car body construction. The cutting edges are additionally hardened and have a hardness of approx. 59 HRC. The tool is made from special tool steel, which is forged and oil-hardened. The pliers are black atramentised, while the head is polished.
Please log in to see prices