Welding machine IM 240-i | 230 V

Aluminum crack testing is used to check for damage in the inner microstructure of the metal.Very often, large areas need to be checked for cracking in order to check whether other body parts have been affected by a crash. A typical example of this is the MacPherson strut area.The diffusion red penetrant is applied to the surface to be tested. Due to its properties and capillary force, it penetrates the finest cracks and pores and is drawn back to the surface after cleaning with the developer. Due to the high contrast to the white developer, even the smallest cracks and defects can be detected.Note: The liquids and agents have no negative properties on welds or on the surfaces on which they are used, they can be easily removed from the surfaces with the test agent cleaner without leaving any residue.Application: 1. Clean the surface thoroughly with cleaner Ardrox 9PR5.2. Apply diffusion red Ardrox 9VF2 and leave to work for approx. 10-20 minutes.3. Thoroughly clean the surface again with cleaner Ardrox 9PR5.4. Apply developer spray Ardrox 9D1B until reaction.5. Check the surface for cracks.

Please log in to see prices

Aluminum crack testing is used to check for damage in the inner microstructure of the metal.Very often, large areas need to be checked for cracking in order to check whether other body parts have been affected by a crash. A typical example of this is the MacPherson strut area.The diffusion red penetrant is applied to the surface to be tested. Due to its properties and capillary force, it penetrates the finest cracks and pores and is drawn back to the surface after cleaning with the developer. Due to the high contrast to the white developer, even the smallest cracks and defects can be detected.Note: The liquids and agents have no negative properties on welds or on the surfaces on which they are used, they can be easily removed from the surfaces with the test agent cleaner without leaving any residue.Application: 1. Clean the surface thoroughly with cleaner Ardrox 9PR5.2. Apply diffusion red Ardrox 9VF2 and leave to work for approx. 10-20 minutes.3. Thoroughly clean the surface again with cleaner Ardrox 9PR5.4. Apply developer spray Ardrox 9D1B until reaction.5. Check the surface for cracks.

Please log in to see prices

Aluminum crack testing is used to check for damage in the inner microstructure of the metal.Very often, large areas need to be checked for cracking in order to check whether other body parts have been affected by a crash. A typical example of this is the MacPherson strut area.The diffusion red penetrant is applied to the surface to be tested. Due to its properties and capillary force, it penetrates the finest cracks and pores and is drawn back to the surface after cleaning with the developer. Due to the high contrast to the white developer, even the smallest cracks and defects can be detected.Note: The liquids and agents have no negative properties on welds or on the surfaces on which they are used, they can be easily removed from the surfaces with the test agent cleaner without leaving any residue.Application: 1. Clean the surface thoroughly with cleaner Ardrox 9PR5.2. Apply diffusion red Ardrox 9VF2 and leave to work for approx. 10-20 minutes.3. Thoroughly clean the surface again with cleaner Ardrox 9PR5.4. Apply developer spray Ardrox 9D1B until reaction.5. Check the surface for cracks.

Please log in to see prices

Temperature indicators are temperature indicating pens with a calibrated melting point. The marking melts when a temperature of 100 °C is reached. It has a accuracy of +/- 1 % of the nominal temperature. For determining the surface temperature at:•  Welding and metal fabrication•  Preheating•  Intermediate storage•  Heat treatment after welding•  Soft annealing•  Stress relief annealingApplication:Mark the workpiece before or during heating. When the nominal temperature is reached, the marking melts (runs) clearly visible. This method is suitable for smooth surfaces.

Please log in to see prices

Temperature indicators are temperature indicating pens with a calibrated melting point. The marking melts when a temperature of 204 °C is reached. It has a accuracy of +/- 1 % of the nominal temperature.For determining the surface temperature at:•  Welding and metal fabrication•  Preheating•  Intermediate storage•  Heat treatment after welding•  Soft annealing•  Stress relief annealingApplication: Mark the workpiece before or during heating. When the nominal temperature is reached, the marking melts (runs) clearly visible. This method is suitable for smooth surfaces.

Please log in to see prices

Temperature indicators are temperature indicating pens with a calibrated melting point. The marking melts when a temperature of 400 °C is reached. It has a accuracy of +/- 1 % of the nominal temperature. For determining the surface temperature at:•  Welding and metal fabrication•  Preheating•  Intermediate storage•  Heat treatment after welding•  Soft annealing•  Stress relief annealingApplication: Mark the workpiece before or during heating. When the nominal temperature is reached, the marking melts (runs) clearly visible. This method is suitable for smooth surfaces.

Please log in to see prices

Temperature indicators are temperature indicating pens with a calibrated melting point. The marking melts when a temperature of 500 °C is reached. It has a accuracy of +/- 1 % of the nominal temperature. For determining the surface temperature at•  Welding and metal fabrication•  Preheating•  Intermediate storage•  Heat treatment after welding•  Soft annealing•  Stress relief annealingApplication:Mark the workpiece before or during heating. When the nominal temperature is reached, the marking melts (runs) clearly visible. This method is suitable for smooth surfaces.

Please log in to see prices

Pressure reducer for all common applications with technical gases. Manufactured according to the highest safety standards of ISO 2503. The robust rubber protective cap is rear-sealed for optimal all-round protection against damage and contamination. Long lifespan resulting in cost savings for servicing, spare parts, and repairs. Latest Encapsulated Technology for precise and stable control behavior, ensuring a process-secure, simple, and user-friendly operation. Additional product information • Working pressure gauge double scale Argon 5, 32 l/min - red line at 24 l/min - CO2 5, 30 l/min - red line at 23 l/min• Content manometer 0 - 315 / 200 bar - red line at 200 bar

Please log in to see prices

Wire feed rollers with 37 mm diameter for wire diameters of 1.0 mm and 1.2 mm.

Please log in to see prices

This silicone-free gas nozzle protection paste prevents the rapid clogging of welding torches due to welding spatter on gas and power nozzles.

Please log in to see prices

Trennfix the silicone-free welding protection spray is an extremely efficient separating and lubricating agent. It prevents the rapid clogging of welding torches due to weld spatters on gas and power nozzles.

Please log in to see prices

This gas flow meter is used for precise measurement of the flow rate of argon and CO2. It is very accurate and provides precise results for gas volume metering.

Please log in to see prices

Cable holder for power cords - also suitable for retrofitting on older devices.

Please log in to see prices

The automatic welding helmet P850 is ideal for those seeking a reliable and aesthetically pleasing product. The helmet features two sensors for automatic darkening and allows for external adjustment of the protection level according to DIN standards. Equipped with True Color Technology, the helmet provides a clear and sharp view, making it easier for the welder to identify objects in the work area and reducing fatigue. Thanks to the external regulation, the welder can effortlessly switch to grinding mode (GRIND) without having to remove the helmet.

Please log in to see prices

The automatic welding helmet Kaiman is versatile and features an automatic darkening function. Equipped with 4 sensors, internal control, and the True Color System, it facilitates welders in detecting objects in the work area. This helps reduce fatigue. The Kaiman filter cartridge has an innovative true-color system. Through a special coating on the filter, visibility becomes sharper and clearer, resulting in a more realistic representation. Additionally, the increased contrast sharpness allows welding technicians to see the weld pool better and work more precisely.Area of application • MIG-MAG (GMAW)• WIG (GTAW) > 20 A• Electrode• OXYGAS• Cutter

Please log in to see prices

This welding helmet with modern sensor technology and automatic dimming has an extra wide and well-padded headband. This increases wearing comfort and noticeably reduces fatigue. Each welding helmet contains two built-in button cells. The following product features make our welding helmet particularly valuable.Product features • Extra large viewing window 97 x 60 mm • Excellent reaction time of 1/20,000 seconds • Variable darkening protection in steps from 9 to 13 • Fine adjustment of the optics sensitivity • 4 independent arc sensors • Power-saving automatic switch-off - Auto-ON /Auto-OFF • Quick and easy replacement of the filter protection screens

Please log in to see prices

Durable gloves made from thick, oil- and water-resistant cowhide leather with a textured surface. Padded back for added protection, unlined inside for better grip, and reinforced with 4-fold Kevlar stitching for durability and strength. With a length of 36 cm, these gloves also offer protection for the forearm.Size XL

Please log in to see prices

Mobile welding protection screen with a slat length of 1800 mm for flexible use.

Please log in to see prices

Suitable for welding torches MB 15, MB 24, MB 25, MB 26, 3G, Force 155, Force 200. Scope of delivery 2x ALU nozzles | Ø 1.0 mm2x ALU nozzles | Ø 1.2 mm2x Steel/MIG nozzles | Ø 0.8 mm2x Steel/MIG nozzles | Ø 1.0 mm2x Steel/MIG nozzles | Ø 0.6 mm

Please log in to see prices

Please log in to see prices

One-piece adapter for basket wire coils K300 with eight arms and two closing levers.

Please log in to see prices

Two-piece adapter with quick-release for K300 basket wire coils.

Please log in to see prices

The centring adapter set is used to align the D200 wire coils on the spool mandrel so that the wire can run straight into the wire inlet.

Please log in to see prices

4-row hand wire brush made of stainless steel.

Please log in to see prices

Hand wire brush with a wire diameter of 0.35 mm. Thanks to its V-shape, this brush is ideal for cleaning, scrubbing, and rust removal in fillet welds and V-seams.

Please log in to see prices

The car body stripper is a special tool that was developed for dismantling work in car body construction. The cutting edges are additionally hardened and have a hardness of approx. 59 HRC. The tool is made from special tool steel, which is forged and oil-hardened. The pliers are black atramentised, while the head is polished.

Please log in to see prices