VAS 882 005/1 Flat head cutter | Ø 6 mm | Steel
Product information "VAS 882 005/1 Flat head cutter | Ø 6 mm | Steel"
The flat-head milling cutter made of carbide with innovative coating for the Metal Edge Cutter VAS 882 005 has a three times longer service life compared to the comparable standard cutter. The AlTiXN coating enables milling under extreme stress and is particularly resistant to high temperatures, high speeds or particularly high workpiece hardness.
For optimum results, the cutting oil 'BTR Fluid' must be used for every milling process.
| Content: | 1 stück, 1 piece |
|---|---|
| Diameter Ø: | 6,0 mm |
| Length: | 95 mm |
| Length × width × height: | 95,5 x 6 x 6 mm |
| Material: | Carbide, HSS, Metal |
| Weight: | 0,037 kg |
Zubehör
Serves as a lubricant for the aluminum milling cutter to optimize the application results and increase the tool life of the cutter.
Please log in to see prices
Ähnliche Artikel
The flat-head milling cutter specially developed for the VAS 882 005 milling edge cutter enables smooth cutting of aluminium without clogging thanks to its coarse cutting geometry.For optimum results, the special Drill Wax lubricant should be used for every operation. The wax prevents the smearing effect and also prevents the milling cutter from clogging.
Please log in to see prices
The round head cutter with innovative coating was specially designed for cutting laser weld seams (LWS) on car body panels. The AlTiXN coating enables milling under extreme stresses and is particularly resistant to high temperatures, high speeds or especially high workpiece hardness.For optimum results, the cutting oil 'BTR Fluid' must be used for every milling process.
Please log in to see prices