VAS 821 003 Gas-shielded arc welder | 3 × 400 V
Product information "VAS 821 003 Gas-shielded arc welder | 3 × 400 V"
The VAS 821 003 gas-shielded arc welder impresses with its effortless operation thanks to a simple, easy-to-understand interface. The four extra-large 37 mm drive rollers provide a large contact surface for the welding wire, which enables optimum wire feed. With two torches, ergonomic torch removal and a slim design, the IP 7-2 is perfect for any use in body shops.
Features
• Automatic torch recognition
• Higher welding speed
• Lower heat input
• Very good gap bridging
• Less material distortion
• Automatic "hold function" of the welding parameters
• Welding programmes for: MIG soldering (CuSi3, AlBz8, CuAl8) | steel/stainless steel | aluminium | TIG | flux-cored wire | electrode welding• Lower heat input
• Saving of individual welding programs
• Integrated interface for software updates
Equipped with:
1 x 308110 Torch 3G | Steel welding | 3.0 m
1 x 308111 Torch 3G | ALU welding | 3.0 m
1 x 337220 Wire feed rollers | steel | 0.8 mm & 1.0 mm | PU: 2 pcs.
1 x 337221 Wire feed rollers | aluminium | 1.0 mm & 1.2 mm | PU: 2 pcs.
1 x 307060 Contact tips M6 x 28 mm | 10-piece set
1 x 304053 Ground cable with clamp | 5 m | 35 mm² | SK 35
2 x 311042 Pressure reducer ProControl | 200 bar (only DE and AT)
1 x 311044 Double branch valve 1/4" for manometer (only DE and AT)
1 x User manual
| Current setting range: | 10 - 280 A |
|---|---|
| Effectiveness: | 85 % |
| Frequency: | 50 - 60 Hz (+/- 10 %) |
| Fuse: | 25 A (slow) |
| Length × width × height: | 920 x 650 x 930 mm |
| Mains connection (Cu): | 4 × 2,5 mm² |
| Mains voltage: | 3 ~ 400 V |
| Mark of conformity: | CE |
| Material: | Metal, Plastic, kunststoff |
| Open circuit voltage: | 72 V (MMA), 96 V (MIG, TIG), 96 V |
| Operating temperature: | -10 bis 40 °C |
| Power factor: | 0,75 |
| Protection class: | IP 23 |
| Sound pressure level: | 66 dB(A) |
| Voltage setting range: | 10 - 50 V |
| Weight: | 67 kg |
| Wire diameter: | 0,6 - 1,2 mm |
| Wire speed range: | 0,5 - 22 m/min |
Zubehör
MIG-MAG torch holder with magnetic foot
Item no: 311043
MIG and MAG torch holder with magnetic foot.
Please log in to see prices
Protection paste for gas nozzles | silicone-free
Item no: 311026
This silicone-free gas nozzle protection paste prevents the rapid clogging of welding torches due to welding spatter on gas and power nozzles.
Please log in to see prices
Nozzle cleaning needle set | 13 pcs.
Item no: 311040
Compact 13-piece nozzle cleaning needle set in a practical, hinged metal box. Contains approx. 90 mm long needle files (0.4-1.6 mm) and a flat file - ideal for cleaning oxyfuel welding nozzles. Scope of delivery: - 13 needles and 1 flat file- robust blue aluminum box
Please log in to see prices
Special pliers | Inert gas welding
Item no: 311041
Special pliers with 4 functions for power nozzles with a diameter of 12 - 15 mm.• Fast and precise trimming of the welding wire• Time-saving cleaning of the shielding gas nozzle• Removal of the shielding gas nozzle• Loosening and tightening of the power nozzle
Please log in to see prices
Gas flow tester | CO2 + Argon
Item no: 311048
This gas flow meter is used for precise measurement of the flow rate of argon and CO2. It is very accurate and provides precise results for gas volume metering.
Please log in to see prices
PTFE liner | MIG-MAG | 3.5 m | red
Item no: 337142
PTFE liner in red for aluminum and stainless steel wire with a wire diameter of 1.0 mm and 1.2 mm. The liner is installed within the torch cable and is used to guide the welding wire from the feeder to the welding point. To ensure a stable wire feed, a timely replacement of the liners is recommended.
Please log in to see prices
Polyamide plastic liner | 3.5 m | black
Item no: 337147
PA liner in black for aluminum wire with a wire diameter of 0.8 mm and 1.0 mm. The liner is installed within the torch cable and is used to guide the welding wire from the feeder to the welding point. To ensure a stable wire feed, a timely replacement of the liners is recommended.
Please log in to see prices
Torch hanger | for 3 torches
Item no: 337204
Torch hanger for securing three torches. Suitable for the InvertaPuls and IM 240 machines.
Please log in to see prices
Wire feed rollers | steel | 0.8 mm & 1.0 mm
Item no: 337220
Wire feed rollers with 37 mm diameter for wire diameters of 0.8 mm and 1.0 mm.
Please log in to see prices
Wire feed rollers | aluminium | 1.0 mm & 1.2 mm
Item no: 337221
Wire feed rollers with 37 mm diameter for wire diameters of 1.0 mm and 1.2 mm.
Please log in to see prices
Automatic welding helmet WS 07 Pro
Item no: 881047
This welding helmet with modern sensor technology and automatic dimming has an extra wide and well-padded headband. This increases wearing comfort and noticeably reduces fatigue. Each welding helmet contains two built-in button cells. The following product features make our welding helmet particularly valuable.Product features • Extra large viewing window 97 x 60 mm • Excellent reaction time of 1/20,000 seconds • Variable darkening protection in steps from 9 to 13 • Fine adjustment of the optics sensitivity • 4 independent arc sensors • Power-saving automatic switch-off - Auto-ON /Auto-OFF • Quick and easy replacement of the filter protection screens
Please log in to see prices
Automatic welding helmet Kaiman
Item no: 881043
The automatic welding helmet Kaiman is versatile and features an automatic darkening function. Equipped with 4 sensors, internal control, and the True Color System, it facilitates welders in detecting objects in the work area. This helps reduce fatigue. The Kaiman filter cartridge has an innovative true-color system. Through a special coating on the filter, visibility becomes sharper and clearer, resulting in a more realistic representation. Additionally, the increased contrast sharpness allows welding technicians to see the weld pool better and work more precisely.Area of application • MIG-MAG (GMAW)• WIG (GTAW) > 20 A• Electrode• OXYGAS• Cutter
Please log in to see prices
Automatic welding helmet P850
Item no: 881042
The automatic welding helmet P850 is ideal for those seeking a reliable and aesthetically pleasing product. The helmet features two sensors for automatic darkening and allows for external adjustment of the protection level according to DIN standards. Equipped with True Color Technology, the helmet provides a clear and sharp view, making it easier for the welder to identify objects in the work area and reducing fatigue. Thanks to the external regulation, the welder can effortlessly switch to grinding mode (GRIND) without having to remove the helmet.
Please log in to see prices
Welding and work gloves | cow grain leather
Item no: 881036
Durable gloves made from thick, oil- and water-resistant cowhide leather with a textured surface. Padded back for added protection, unlined inside for better grip, and reinforced with 4-fold Kevlar stitching for durability and strength. With a length of 36 cm, these gloves also offer protection for the forearm.Size XL
Please log in to see prices
Variant item
Welding protection blanket | 100 × 100 cm
Item no: 881011
The welding protection blanket consists of E-glass fabric with HT coating and is highly resistant to mechanical stress. It is double-layered, non-combustible, and has been tested according to DIN EN 13501-1 by MPA Dresden. Additionally, it has MED certification.Fire protection class according to DIN EN 13501-1: A2 - s1, d0Short-term heat protection: 850 °CLong-term heat protection: 750 °CFabric thickness: 1.4 mmFabric weight: 1070 g/m² (GSM)
Please log in to see prices
Variant item
Steel/MIG nozzles | Ø 1.0 mm | 10 pcs.
Item no: 307053
Contact nozzle made of E-Cu. Suitable for welding torches MB 15, MB 24, MB 25, MB 26, 3G, Force 155, Force 200.
Please log in to see prices
Variant item
Grinding protection blanket | 200 × 150 cm
Item no: 881003
The spark protection blanket consists of high-quality glass fabric, needled with black carbon fiber (Sigrafil O / Panox).Heat protection: 700 °CFabric thickness: 2.0 mmFabric weight: 770 g/m²
Please log in to see prices
Variant item
Welding wire SG2 | Ø 0.8 mm | D200 | 5 kg
Item no: 311082
The welding wire SG2 with a diameter of 0.8 mm is wound on a D200 plastic spool. It is particularly suitable for the MIG/MAG welding process and ensures a precise and stable weld seam. The special composition of the wire enables optimal welding performance, minimizing spatter formation. The welding wire is suitable for welding carbon steel, single and multi-layer welding of non-alloy and low-alloy steels, structural steels, and occasionally stainless steel.
Please log in to see prices
Variant item
Welding wire AlSi12 | Ø 1.2 mm | D200 | 2 kg
Item no: 311081
The welding wire AlSi12 with a diameter of 1.2 mm is wound on a D200 plastic spool. It is made of an aluminum-silicon alloy (aluminum casting alloys) and is suitable for TIG and MIG welding of aluminum-silicon alloys. Applicable shielding gases (EN ISO 14175) for TIG: Argon I1, for MIG: Argon I1, and Argon-Helium mixtures I3
Please log in to see prices
Variant item
Grinding protection blanket | 100 × 100 cm
Item no: 881004
The spark protection blanket consists of high-quality glass fabric, needled with black carbon fiber (Sigrafil O / Panox).Heat protection: 700 °CFabric thickness: 2.0 mmFabric weight: 770 g/m²
Please log in to see prices
Variant item
Welding wire CuSi3 | Ø 1.0 mm | D200 | 5 kg
Item no: 311071
The CuSi3 welding wire with a diameter of 1.0 mm is wound on a D200 plastic spool made of copper-silicon alloy and has a low melting point. It is excellent for both TIG and MIG welding (soldering) of galvanized steel sheets in body construction. In this process, the corrosion protection of galvanized surfaces is largely preserved, and usually, preheating of the base material is not required.It is recommended to keep the weld pool not too wide and to pay attention to low heat input. In MIG welding with a short arc/impulse method, as well as in TIG welding, it is advisable to introduce as much weld material as possible. Applicable shielding gases (EN ISO 14175) for TIG: Argon I1, for MIG: Argon I1, I3.
Please log in to see prices
Variant item
Grinding protection blanket | 250 × 125 cm
Item no: 881002
The spark protection blanket consists of high-quality glass fabric, needled with black carbon fiber (Sigrafil O / Panox).Heat protection: 700 °CFabric thickness: 2.0 mmFabric weight: 770 g/m²
Please log in to see prices
Variant item
Grinding protection blanket | 300 × 250 cm
Item no: 881001
The spark protection blanket consists of high-quality glass fabric, needled with black carbon fiber (Sigrafil O / Panox).Heat protection: 700 °CFabric thickness: 2.0 mmFabric weight: 770 g/m²
Please log in to see prices
Variant item
Welding wire SG2 Ti vb | Ø 1.0 mm | D200 | 5 kg
Item no: 311075
The welding wire SG2/Ti with a diameter of 1.0 mm is coated with bronze, providing additional protection against rust. It is wound on a D200 plastic spool and is made of low-alloyed steel, specifically designed for the MAG welding of non-alloyed and low-alloyed steels. This welding wire is particularly suitable for overlaying manufacturing primers, zinc protective coatings, and rusted components. The weld metal produced by this wire is resistant to aging and can be used at operating temperatures ranging from -10 °C to 450 °C. Applicable shielding gases (EN ISO 14175) for MAG welding include CO2 or mixed gases such as M22, M33, M21, M23.
Please log in to see prices
Variant item
Torch 3G | MIG soldering (CuSi3) | 3.0 m
Item no: 308116
The 3-meter long MIG welding torch package 3G is equipped with a steel nozzle and a black handle. It has been specifically designed for MIG welding with a power output of up to 180 A.
Please log in to see prices
Variant item
Torch 3G | ALU welding | 3.0 m
Item no: 308111
With its compact black mini handle, this welding torch combines maneuverability and optimal accessibility, even in challenging space conditions.
Please log in to see prices
Variant item
Torch 3G | Steel welding | 3.0 m
Item no: 308110
With its compact blue mini handle, this welding torch combines maneuverability and optimal accessibility, even in challenging space conditions.
Please log in to see prices
Variant item
Steel/MIG nozzles | Ø 0.8 mm | 10 pcs.
Item no: 307052
Contact nozzle made of E-Cu. Suitable for welding torches MB 15, MB 24, MB 25, MB 26, 3G, Force 155, Force 200.
Please log in to see prices
Variant item
ALU nozzles | Ø 1.0 mm | 10 pcs.
Item no: 307050
Contact nozzle for aluminium welding made of E-Cu. Suitable for welding torches MB 15, MB 24, MB 25, MB 26, 3G, Force 155, Force 200.
Please log in to see prices
Variant item
Welding wire AlSi12 | Ø 1.0 mm | D200 | 2 kg
Item no: 311080
The welding wire AlSi12 with a diameter of 1.0 mm is wound on a D200 plastic spool. It is made of an aluminum-silicon alloy (aluminum casting alloys) and is suitable for TIG and MIG welding of aluminum-silicon alloys. Applicable shielding gases (EN ISO 14175) for TIG: Argon I1, for MIG: Argon I1, and Argon-Helium mixtures I3
Please log in to see prices
Variant item
ALU nozzles | Ø 1.2 mm | 10 pcs.
Item no: 307051
Contact nozzle for aluminium welding made of E-Cu. Suitable for welding torches MB 15, MB 24, MB 25, MB 26, 3G, Force 155, Force 200.
Please log in to see prices
Variant item
Welding wire CuSi3 | Ø 0.8 mm | D200 | 5 kg
Item no: 311070
The CuSi3 welding wire with a diameter of 0.8 mm is wound on a D200 plastic spool made of copper-silicon alloy and has a low melting point. It is excellent for both TIG and MIG welding (soldering) of galvanized steel sheets in body construction. In this process, the corrosion protection of galvanized surfaces is largely preserved, and usually, preheating of the base material is not required.It is recommended to keep the weld pool not too wide and to pay attention to low heat input. In MIG welding with a short arc/impulse method, as well as in TIG welding, it is advisable to introduce as much weld material as possible.Applicable shielding gases (EN ISO 14175) for TIG: Argon I1, for MIG: Argon I1, I3.
Please log in to see prices
Variant item
Steel/MIG nozzles | Ø 0.6 mm | 10 pcs.
Item no: 307054
Contact nozzle made of E-Cu. Suitable for welding torches MB 15, MB 24, MB 25, MB 26, 3G, Force 155, Force 200.
Please log in to see prices
