Transformer Multiphase | AP 95 | 230/400 V
Please log in to see prices
Available, delivery time: 2-5 days
Product information "Transformer Multiphase | AP 95 | 230/400 V"
The transformer multiphase serves as the power source for the Airpuller AP95 dent repair system. It is flexibly adjustable to the local power supply: Reconnectable Single-phase 220 - 240 V, Three-phase 400 V.
Note: The transformer is factory-set for the 400 V three-phase power grid.
| Frequency: | 50/60 Hz |
|---|---|
| Fuse: | 16 A (slow) |
| Length × width × height: | 210 x 180 x 390 mm |
| Mains voltage: | 230 V |
| Open circuit voltage: | 7 V |
| Operating temperature: | -10 bis 40 °C |
| Protection class: | IP 21 |
| Weight: | 16 kg |
Zubehör
Allows for quick dent removal with the triple-layered sheet and additionally provides the option to weld wave wire. Expandable through additional contact pieces for welding: • U-washers • T-pins • Bolts Included items 1 x Contact piece for wave wire 1 x Triple-layered sheet
Please log in to see prices
The welding gun is suitable for the Work Station WS 20, WS 60 and the Transformer AP 95. It comes with a control cable. This gun can be used to weld pins, bolts, washers, and wiggle wire. It is also suitable for sheet metal embossing and working with carbon electrodes.
Please log in to see prices
The transport trolley for the transformer and the AP 95 is made of sturdy sheet steel and features a high-quality powder coating.
Please log in to see prices
The cable serves as a connecting element between e.g. spot welding devices and the magnetic mass MC 95. Thanks to its cable length of 2 meters, problem areas, such as in the roof area or at hard-to-reach locations, can be quickly and effectively reached. The cable is directly connected to the angled copper shoe using a quick fastener. Clamps and other obstructive fastening tools are not required. When working with the magnetic ground, doors and flaps can be straightened in the closed position.Areas of application:• Working with U-washers• Working with quick dent removal hammer• Welding on corrugated wire• Welding on T-pins• Working with carbon rod or dolly electrodeNote: Not suitable for spot welding.
Please log in to see prices
Ground cable with ground lug and cable bushing.
Please log in to see prices
The transformer multiphase serves as the power source for the Airpuller AP95 dent repair system. It is flexibly adjustable to the local power supply: Reconnectable Single-phase 220 - 240 V, Three-phase 400 V.Note: The transformer is factory-set for the 400 V three-phase power grid.
Please log in to see prices
Copper electrode for use with the Airpuller AP 95.
Please log in to see prices
Electrode set for use with the Airpuller AP 95. Scope of delivery 1 x 357000 Pin electrodes | AP 95 | PU: 5 pcs.1 x 357001 Copper electrode | AP 95 | PU: 1 pc.
Please log in to see prices
Half-round diamond file to remove excess material and shape the object to the desired form.
Please log in to see prices