Strongmaster IFA Welding Fume Extractor
Please log in to see prices
Available, delivery time: 2-5 days
Product information "Strongmaster IFA Welding Fume Extractor"
Thanks to the cleanable filter cartridge, this appliance incurs only minimal follow-up costs. The filter cartridge remains in the system during cleaning so that no dust can enter the work area. A baffle plate serves as a pre-separator for coarse particles. The remaining fumes and dust hit the filter cartridge and are almost completely separated by surface filtration. The filters are cleaned via a maintenance door using a compressed air gun on the clean air side. The particles are collected in a dust collector and can then be disposed of. The device is equipped with a powerful screw fan with high negative pressure, which guarantees a high volume flow even when the filter is saturated.
• Baffle plate as pre-separator
• Durable, cleanable dust class M filter cartridge with large filter surface area
• Optical and acoustic filter monitoring
• Seal seat lifting device
• Operating hours counter
• Extraction arm Ø 150 mm
• 5 m mains cable
• PE bag for the dust collector
| Air humidity: | max. 70% |
|---|---|
| Details: | Filter surface: 10 m² |
| Dust class: | M |
| Frequency: | 50 Hz |
| Length × width × height: | 665 x 820 x 1365 mm |
| Mains voltage: | 3 ~ 400 V |
| Mark of conformity: | according to 2006/42/EC |
| Max. negative pressure: | 2900 Pa |
| Max. volume flow rate: | 1860 m³/h |
| Operating temperature: | 5° - 35 °C |
| Power: | 1,1 kW |
| Protection class: | IP 54 |
| Sound pressure level: | 72 dB(A) |
| Weight: | 165 kg |