Spray gun washer WSM30 + Kit M

Item number: 837253

Product information "Spray gun washer WSM30 + Kit M"

Automatic stainless steel spray gun washing unit. Optimally suited for use with Prolaq WS. Pre-wash and main wash take place in the automatic section, which is separated from the manual rinsing section. Both sections have separate drains to prevent liquids from mixing.

Product Information

• Automatic and manual washing or rinsing

• Space for 2 spray guns in the automatic section

• Simultaneous automatic cleaning of 2 spray guns possible

• Timer for individually adjustable cleaning duration

• Automatic extraction in the working area

• Stainless steel housing

• High-quality diaphragm pump

• ARTEX II 2G protection class

Scope of delivery

1 x Spray gun washer

2 x plastic clamp for paint spray gun

1 x Flexible hose | 1 m | Ø 10 mm

1 x Compressed air line | 2 m

2 x Cleaning brush

1 x Ground cable

Details:	Temperature class: ATEX II 2G
Length × width × height:	692 x 685 x 1490 mm
Material:	Stainless steel
Operating pressure:	6 - 10 bar
Weight:	75 kg

Flyer

Zubehör

Chemical protective gloves | Neoprene

Item no: 881055

Areas of application toolmaking mechanical engineering automotive metalworking assembly storage work

Please log in to see prices

Sedimentation tank with insert | 30 liters

Item no: 837229

Stainless steel container with sedimentation insert for PROLAQ WS 50 cleaning solution for spray guns.

Please log in to see prices

Prolaq WS | PU: 20 l

Item no: 837230

The PROLAQ WS varnish remover stands out for its strong cleaning power on water- and solvent-based varnishes and paints, as well as for its fast and almost residue-free drying. The paint remover does not require labelling, making it a first-class alternative to cellulose thinner. In combination with the PROLAQ WS Rinse and the WSM30 spray gun washer, an optimum effect is achieved, as well as an increase in service life thanks to its circulation capability. • removes primarily solvent-based and water-based paints and varnishes• cleans all paint application tools, paint pumps, pressure rollers, etc.• fast and virtually residue-free drying• increases occupational safety → 45 % VOC content• safe → no labelling required• 5-10 times longer service life → recyclable• can be used mechanically and manually• ready for use

Please log in to see prices

Prolaq WS Rinse | PU: 20 l

Item no: 837235

For rinsing painting tools after cleaning with PROLAQ WS Cleaner. • removes any kind of cleaning residue • removes dust, light grease and oil, felt-tip pens and fingerprints• fast and residue-free• for manual and machine use• water-based, surfactant-free cleaner• VOC content below 20 %Application:After cleaning, rinse the painting tools manually in an immersion bath with PROLAQ WS Rinse. For machine use, add the rinsing liquid to the cleaning system.

Please log in to see prices

Prolaq WS | Starter set | 3-piece

Item no: 837236

Cleaning system for paint shop equipmentPROLAQ WS powerfully removes paints, lacquers and printing inks at a much lower workplace risk potential than conventional thinners such as acetone or ethyl acetate. Carefully selected raw materials ensure a low VOC content of the cleaners, minimal odor pollution and a pleasant working atmosphere.• for water-based and solvent-based paints• very long service life• lower disposal and handling costs• strong cleaning power• for automatic cleaning machines and manual devicesScope of delivery 1 x 837230 Prolaq WS | PU: 20 l1 x 837235 Prolaq WS Rinse | PU: 20 l1 x 837229 Sedimentation tank with insert | 30 liters

Please log in to see prices

Cleaning brush

Item no: 837853

Cleaning brush for spray gun washer WSM30 + Kit M.

Please log in to see prices