Powerful mini angle grinder for hard-to-reach areas.
Please log in to see prices
Pneumatic axial grinder GTC-082A/SW.
Please log in to see prices
Pneumatic pistol grinder for sanding pads with a diameter of 127 mm.
Please log in to see prices
Ideal for grinding, brushing, polishing, and rust removal tasks in automotive body repair.
Please log in to see prices
Abrasive set for the gentle removal of paint and dirt from sheet metal. Leaves a completely cleaned surface for the next phases of coating, painting or soldering.Scope of delivery2 x 617080 CSD sanding disc1 x 618011 Mandrel for CSD sanding disc
Please log in to see prices
The CSD sanding disc is ideal for the removal of rust, paint, scale and much more. To prevent excessive adhesion or clogging of the cleaning wheel, it is important to pay attention to the correct rotational speed.
Please log in to see prices
Mandrel for secure fastening of CSD sanding discs on the grinding machine.
Please log in to see prices
Red pneumatic axial grinder PK3132.
Please log in to see prices
Pneumatic disc cutter with safety cover.
Please log in to see prices
The Air Rubber AR 06 is ideally suited for removing films on painted surfaces as well as adhesive residues.
Please log in to see prices
Solid carbide fine burr with a round shaped head for post-processing weld seams.
Please log in to see prices
Solid carbide burr with a small conical head for post-processing weld seams.
Please log in to see prices
Solid carbide burr with a round shaped head for post-processing weld seams.
Please log in to see prices
Solid carbide burr with a big cone shaped head for post-processing weld seams.
Please log in to see prices
Solid carbide burr with a cylindrical dome-shaped head for post-processing ALU weld seams.
Please log in to see prices
Solid carbide burr with a round-shaped head for post-processing ALU weld seams.
Please log in to see prices
Solid carbide burr in conical shape with a round head for post-processing ALU weld seams.
Please log in to see prices
Mandrel for cutting discs with a shaft diameter of 6 mm. Suitable for cutting discs with a 6 mm deep hole and a thickness ranging from 0 to 4 mm.
Please log in to see prices
21-piece set containing cutting discs and a mandrel.Scope of delivery 1 x 637020 Mandrel for cutting discs with 6 mm hole10 x Cutting discs | Ø 30 × 1,0 × 6 mm10 x Cutting discs | Ø 50 × 1,0 × 6 mm
Please log in to see prices
Flexible and extremely temperature-resistant backing pad with high durability. Suitable for use with common angle grinders.
Please log in to see prices
The rubber disc AR 06 is designed for removing films and adhesive residues on painted surfaces.
Please log in to see prices
Holder with a shaft diameter of 6 mm for the rubber disc AR 06.
Please log in to see prices
The cutting disc for stainless steel (INOX) with a disc width of 0.8 mm is suitable for the fastest, cool, and particularly thin and burr-free cuts. Its ergonomic design ensures comfort and the highest safety during use.
Please log in to see prices
The AluCut side milling cutter stands out for its outstanding performance in processing both steel and aluminum car bodies, providing an impressive service life.
Please log in to see prices
Mandrel for AluCut side milling cutter.
Please log in to see prices
The AluCut side milling cutter set is ideally suited for milling hard and ultra-high-strength-steel materials, such as Usibor. Thanks to its special gearing, it allows for extremely precise removal of weld seams. The set also features a special attachment with a 'driver' for secure application. It is compatible with all common straight and angle grinders that have a 6 mm diameter mandrel.Scope of delivery2 x 637115 UHSS/AluCut side milling cutter | Ø 40 × 4.4 mm1 x 637116 Mandrel for AluCut | Ø 6 mm
Please log in to see prices
HSS fine burr with a pointed cone shaped head for post-processing weld seams.
Please log in to see prices
HSS fine burr with a round shaped head for post-processing weld seams.
Please log in to see prices
HSS fine burr with a round shaped head for post-processing weld seams.
Please log in to see prices
HSS fine burr with a disc shaped head for post-processing weld seams.
Please log in to see prices
Sanding disc set suitable for use with the eccentric sander Rotex RO 90 DX.
Please log in to see prices
The pneumatic belt sander 330 is ideal for narrow surfaces. It operates with stepless speed regulation and is specifically designed for sanding belts with dimensions of 10 x 330 mm. It features a quick belt change system and automatic belt adjustment.
Please log in to see prices
The belt sander 457 is ideally suited for the final finishing of bodywork surfaces and particularly unleashes its full potential on narrow areas. Thanks to its stepless speed control, the sanding speed can be freely adjusted as needed by raising or lowering the lever. For releasing and separating: • Weld spots (Usibor, BTR-BOR, etc.) • Weld seams (MIG-MAG, etc.) • Laser weld seams Note: Releasing and separating weld spots, weld seams, and laser weld seams only in conjunction with the premium sanding belts K36, K60 a nd K80.
Please log in to see prices
The 457 belt sander arm expands the application range of the 330 belt sander and allows the use of sanding belts in the 13 x 457 mm format. As a well-designed extension, it can be quickly and easily mounted or removed from the 330 belt sander using just one screw. This enables optimized sanding – efficient, flexible, and precise across a wide range of applications.
Please log in to see prices
The sanding belt premium with precision-shaped abrasive grains runs cooler compared to conventional file belts. This reduces metal discoloration and prevents oxidation, minimizing the risk of heat stress cracks. Advantages • Ensures maximum performance for all applications with the belt sander• Provides sensational stock removal and a uniform finish• High durability• Perfect solution for weld seam processing• Heat generation is minimized
Please log in to see prices
The non-woven belts feature minimal belt elongation and are ideal for finishing work on steel and aluminum car bodies.Properties:• Primarily for dry grinding• Suitable for wet grinding due to integrated lubricant• Compatible with common grinding additives• Ensures compliance with critical tolerances• Uniform grinding without material undercutting• Flexible with excellent contour and surface adaptation• High tear resistance, low belt elongation, and long lifespan• Reproducible surface results
Please log in to see prices
For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding. • high tear strength with optimum flexibility • consistent results through very good grain adhesion• high economic efficiency due to high abrasive performance and long tool lifeUse grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
Please log in to see prices
The non-woven belts feature minimal belt elongation and are ideal for finishing work on steel and aluminum car bodies.Properties:• Primarily for dry grinding• Suitable for wet grinding due to integrated lubricant• Compatible with common grinding additives• Ensures compliance with critical tolerances• Uniform grinding without material undercutting• Flexible with excellent contour and surface adaptation• High tear resistance, low belt elongation, and long lifespan• Reproducible surface results
Please log in to see prices
For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding. • high tear strength with optimum flexibility • consistent results through very good grain adhesion• high economic efficiency due to high abrasive performance and long tool lifeUse grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
Please log in to see prices
High-quality sanding belt for the removal of spot welds as well as for other demanding grinding tasks in the field of bodywork repair. The state-of-the-art ceramic grain abrasive stands out for its high cutting rate. Due to its triangular shape, the ceramic abrasive grain provides a cool grind and minimizes heat-related effects such as metal discoloration. Advantages • High tear resistance with adjusted flexibility • Excellent grain adhesion • Long service life • Step-by-step fine grinding of larger areas • Structuring of surfaces
Please log in to see prices