Scope of delivery  1 x Crimping pliers | no. 1 | narrow/short 1 x Crimping pliers | no. 2 | wide/short 1 x Crimping pliers | no. 3 | wide/long 1 x Crimping pliers | no. 4 | 90° bent

Please log in to see prices

Pulling eye nuts M4 for stud welder VAS 5196 Alu Pull Kit AK98.

Please log in to see prices

The stud welding device VAS 5196 provides an efficient solution for repairing dents in aluminum sheets in body and vehicle construction. Equipped with an automatic gun and 100% microprocessor control, this device is ideal for eliminating small dents, dings, longitudinal scratches, and hail damage. The VAS 5196 allows for all dent repairs to be performed from the outside, eliminating the cumbersome pushing from the inside. Thanks to the precise digital display of the charging voltage, the performance parameters can be accurately adjusted. This ensures a precise application of the welding device. Lieferumfang 1 x Steuergerät AK 981 x 368001 Welding gun | aluminium studs | Ø 3-8 mm1 x 368104 Stud holder M41 x 367015 Welding studs | AlSi12 | M4 × 15 mm | 100 pcs.1 x 368050 Pull rod V2A | 160 mm | PU: 3 pcs.2 x 368043 Pulling eye nut | M4 | PU: 3 pcs.1 x 311060 Temperature indicator strip | 6 points | max 160°C1 x 368060 Universal stud gripper1 x 351060 Maxilift | incl. 3-finger Dent Pulling Claw2 x Ground cable1 x Assembly tool1 x Instruction manual1 x Transport case

Please log in to see prices

Consists of  1 x 367030 Welding studs | AlSi12 | T5 × 10.5 mm | 100 pcs. 1 x 367035 Welding studs | AlSi12 | T5 × 15.5 mm | 100 pcs. 1 x 367040 Welding studs | AlSi12 | T5 × 25 mm | 100 pcs. 1 x 367045 Welding studs | AlSi12 | M6 × 12 mm | 100 pc. 1 x 367050 Welding studs | AlSi12 | M6 × 16.5 mm | 100 pc. 1 x 367085 Pulling pins | V2A | 4 × 35 mm | 200 pcs. 1 x 368002 Welding gun | steel studs | Ø 3-8 mm 1 x 368005 Special welding gun attachment | VW | Audi 1 x 368104 Stud holder M4 1 x 368105 Stud holder M5 1 x 368106 Stud holder M6

Please log in to see prices

The VAS 5159 Telescopic gauge offers an ideal solution for damage assessment, measuring structural damage, and dimensional control after straightening. The special measuring tips allow measurements even in hard-to-reach areas and between non-flat points. The included measuring cone facilitates determining borehole distances. Knurled screws on the holders of the measuring tubes prevent unintentional adjustment of the tubes.Scope of delivery2 x Measuring cone for telescopic gauge2 x Measuring tip | short | straight2 x Measuring tip | short | angled2 x Measuring tube | long2 x Measuring tube holder

Please log in to see prices

The VAS 5160 Telescopic gauge offers an ideal solution for damage assessment, measuring structural damage, and dimensional control after straightening. The special measuring tips allow measurements even in hard-to-reach areas and between non-flat points. The included measuring cone facilitates determining borehole distances. Knurled screws on the holders of the measuring tubes prevent unintentional adjustment of the tubes.Scope of delivery2 x Measuring cone for telescopic gauge2 x Measuring tip | short | straight2 x Measuring tip | short | angled2 x Measuring tube | long2 x Measuring tube holder

Please log in to see prices

Folding pliers "wide/short" with 3.5 mm gap

Please log in to see prices

The VAS 881 003 belt sander is ideal for narrow surfaces. It operates with stepless speed regulation and is specifically designed for sanding belts with dimensions of 10 x 330 mm. It features a quick belt change system and automatic belt adjustment.

Please log in to see prices

For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.• high tear strength with optimum flexibility• consistent results through very good grain adhesion• high economic efficiency due to high abrasive performance and long tool lifeUse grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.

Please log in to see prices

For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.• high tear strength with optimum flexibility• consistent results through very good grain adhesion• high economic efficiency due to high abrasive performance and long tool lifeUse grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.

Please log in to see prices

Pull pins made of V2A material with a diameter of 4 mm and a length of 35 mm for the stud welding device VAS 5196 Alu Pull Kit AK98.

Please log in to see prices

The sanding belt premium with precision-shaped abrasive grains runs cooler compared to conventional file belts. This reduces metal discoloration and prevents oxidation, minimizing the risk of heat stress cracks. Advantages • Ensures maximum performance for all applications with the belt sander• Provides sensational stock removal and a uniform finish• High durability• Perfect solution for weld seam processing• Heat generation is minimized

Please log in to see prices

The sanding belt premium with precision-shaped abrasive grains runs cooler compared to conventional file belts. This reduces metal discoloration and prevents oxidation, minimizing the risk of heat stress cracks. Advantages • Ensures maximum performance for all applications with the belt sander• Provides sensational stock removal and a uniform finish• High durability• Perfect solution for weld seam processing• Heat generation is minimized

Please log in to see prices

The sanding belt premium with precision-shaped abrasive grains runs cooler compared to conventional file belts. This reduces metal discoloration and prevents oxidation, minimizing the risk of heat stress cracks. Advantages • Ensures maximum performance for all applications with the belt sander• Provides sensational stock removal and a uniform finish• High durability• Perfect solution for weld seam processing• Heat generation is minimized

Please log in to see prices