Powerlift | incl. electrode holder AP 95
Item no: 351050
The Power Lift, including electrode holder, is an ideal addition to the proven Airpuller AP95 dent removal system, enabling efficient removal of deep and large body dents and dings. Experience outstanding performance and precision with this innovative accessory.Application1. The Power Lift can be easily secured without the use of tools.2. Fully depress the power button of the AP95, hang the Power Lift in the AP95 cage, and then release the power button.3. Weld the Power Lift electrodes (included) in place, pull up the lever, and twist off the electrode.4. The Power Lift provides ample space to eliminate sheet metal tensions simultaneously with the dent removal hammer.5. Always support the Power Lift on sheet metal edges or at the edge!6. After removing the Power Lift, any remaining dents in the sheet metal can easily be removed with the Airpuller AP95.
Please log in to see prices
Maxilift | incl. 3-finger Dent Pulling Claw
Item no: 351060
The Maxilift incl. a 3-finger dent pulling claw is the ultimate alignment tool for bodywork repairs. With its unique 3-finger dent pulling claw, it functions as the panel beater's third hand, perfect for pulling up wave wire during dent removal. Robust, precise, and compact – an indispensable companion for any bodyshop.
Please log in to see prices
Dent Pulling Claw | 3-finger
Item no: 358050
High-quality pulling claw with 3 hooks for the Maxilift.
Please log in to see prices
Magnetic mount
Item no: 358200
Sturdy magnetic mount for the Maxilift/Powerlift. Delivery does not include Maxilift/Powerlift.
Please log in to see prices
Silencer | 3/8" | blue
Item no: 500003
Silencer for the Vacuum Plates of the Pulling Tower.
Please log in to see prices
Rubber plate for vacuum plate
Item no: 500017
The rubber plate serves as a replacement or wear part for the vacuum plate. It ensures reliable sealing and optimal adhesion to the workshop floor.
Please log in to see prices
X-Vacuum Plate
Item no: 500018
The X-Vacuum Plate ensures that it is firmly anchored to the floor to withstand even the most extreme tensile loads. The new vulcanised rubber coating increases abrasion resistance and ensures a longer service life with intensive use.
Please log in to see prices
Vacuum plate | vertical tension
Item no: 500020
Thanks to the soft foam rubber seal, the vacuum plate ensures that it is firmly anchored to the floor even on small bumps.
Please log in to see prices
Variant item
Pulling Tower with Vacuum Plate | short version
Item no: 500030
The mobile Pulling Tower is securely fixed to the workshop floor using a pneumatic vacuum plate. Thanks to its low weight and high mobility, it can be positioned quickly and easily at the repair vehicle. The vacuum plate, equipped with a soft foam rubber seal, ensures reliable and secure anchoring to the floor even on slightly uneven surfaces. The pulling height can be adjusted in 17 positions up to a maximum height of 1.15 m. This makes the Trac Tower suitable for high applications, such as work on roof pillars, as well as for lower areas of use such as door sills. The pulling force is precisely and efficiently controlled via a belt-driven manual ratchet system. Scope of delivery 1 × Pulling Tower 1 × Ratchet with pulling strap 1 × Vacuum plate | vertical pull 1 × 500011 Pulling claw for Pulling Tower
Please log in to see prices
Extension | 500 mm | for short Pulling Tower
Item no: 500031
The 50 cm extension upgrades the short Pulling Tower to the standard version. By adding this component, the maximum pulling height increases from 115 cm to 160 cm. This allows higher pulling points, such as those located in the area of roof pillars or upper body structures, to be reached without difficulty. Scope of delivery1 × Extension1 × Locking pin1 × Storage bracket
Please log in to see prices
Extension | 500 mm | for standard Pulling Tower
Item no: 500033
The 50 cm extension expands the standard Pulling Tower and increases the maximum pulling height to 208 cm. This allows even very high pulling points, such as those in the area of roof frames or upper body structures, to be reached safely. As a result, work on tall vehicle structures is also possible, for example on delivery vans, trucks, and vans. Scope of delivery 1 × Extension 1 × Locking pin
Please log in to see prices
Bi-Puller | Dent Pulling Claw | 9-finger
Item no: 501009
Dent pulling claw with 9 hooks for pulling wiggle wire on straight sheet metal parts such as doors and sills, as well as on convex sheet metal parts such as fenders.
Please log in to see prices
Slide hammer | universal
Item no: 501025
Universal slide hammer for use with the dent point on spot welding devices. Suitable for the InvertaSpot GT and the welding gun PSP 60.
Please log in to see prices
Hook for washers | M14
Item no: 501034
Hook for washers for removing dents on vehicle parts.
Please log in to see prices
Quick Pulling Hammer | complete set (Saitek type)
Item no: 501040
Only suitable for spot welding gun InvertaSpot Type Saitek.Scope of delivery1 x Quick Pulling Hammer (Type Saitek)1 x 501031 Headpart for triple sheet metal1 x 297013 Triangle dent pulling washers | PU: 15 pcs.
Please log in to see prices
Tension belt | polyester | 1200 × 80 mm
Item no: 501310
The polyester tension belt is ideal for pulling and straightening damaged vehicle body parts. Its soft wrapping around the sheet metal profiles prevents damage that may occur when using chains.
Please log in to see prices
Slide hammer incl. adapter & Bi-Puller
Item no: 502002
Slide hammer including adapter and bi-puller. The perfect set for pulling and straightening with wiggle wire.
Please log in to see prices
Variant item
Slide hammer with double hook | 5 kg
Item no: 511300
This sliding hammer with double hooks is indispensable for any bodyshop. It is ideal for a precise or powerful drive of attachments. The handle is not screwed on but cast. The integrated hand protection is extra-large to prevent potential hand injuries from squeezing.
Please log in to see prices
Double hook for slide hammer | extra hard
Item no: 511310
The double hook for slide hammers has been crafted from forged, exceptionally high-quality steel and subsequently tempered. This hook is suitable for any chain end, regardless of the brand. When flipping and reattaching the chain, a parallel alignment is ensured, preventing any twists. All traditional brackets, whether connected via a ball socket or a triangle with a pull chain or slide hammer, can be effortlessly attached with the double hook.
Please log in to see prices
Corner pull clamp with double hook adapter | 90°
Item no: 511311
The 90°C angular corner pull clamp with double hook adapter provides automatic self-tightening via the cone and is particularly suitable for applications where conventional clamps are too large or in corners where direct pulling is required for optimal results. The hexagonal clamping screw is recessed in the clamp body, locking it and allowing for easy single-handed clamping. For connection with slide hammers or chains, the double hook 511310 is used. The double hook adapter of the clamp is positioned between the two claws of the hook.
Please log in to see prices
Mini Bite clamp | Jaw width: 30 mm
Item no: 511314
Mini Bite clamp with automatic self-tensioning via the cone. Excellently suited for reaching narrow and concealed spaces due to its slim, pointed shape. The clamping screw with hexagon is recessed in the clamp body and thus locked. This enables straightforward single-handed clamping. For connection with pulling levers or chains, the double hook 511310 is used. The double hook adapter of the clamp is positioned between the two claws of the hook.
Please log in to see prices
Double clamp | Jaw width: 33 & 70 mm
Item no: 511315
Double clamp with a narrow and a wide jaw. The advantage: Depending on the requirements, the object can be gripped with either the narrow or the wide side. The clamping screws are offset, allowing thin sheets to be securely held well within the healthy range. The hexagonal heads of the clamping screws are recessed in the clamp body, thereby locked, enabling genuine one-handed clamping.
Please log in to see prices
Chain shortener | double hook
Item no: 511317
Chain shortener for shortening chains or connecting two chains.
Please log in to see prices
Double hook connector for eyelets
Item no: 511325
The double hook connector is a connecting piece between the double hook and the towing eyelets. However, it can also be used for hanging in specific recesses on the body.
Please log in to see prices
K210 Pulling clamp | self-clamping | small
Item no: 511420
Small self-clamping pulling clamp K210.
Please log in to see prices
K214 Pulling clamp | laterally self-clamping
Item no: 511424
Laterally self-clamping pulling clamp K214.
Please log in to see prices
Line Puller 1250 | Full set
Item no: 821102
The 1250 mm long Line Puller is used to repair extensive damages and align optical edges over long distances. Despite its length, the Line Puller can be easily operated by a single person. Thanks to the integrated measuring spring, it is possible to reliably measure the height of the sheet metal or edge from the undamaged side of the vehicle. Scope of delivery 1 x Aluminium bar | 1250 mm | with straight feet1 x 821107 Pulling hook with 3 claws | Line Puller1 x 821108 Pulling hook with 3 claws | Line Puller1 x 821142 Pull rod | Ø 8 mm | 4-piece set2 x Suction cup holders1 x Measuring spring bar
Please log in to see prices
