Plasma Cutter WS 40-i | 230 V | Single Phase
Product information "Plasma Cutter WS 40-i | 230 V | Single Phase"
The latest generation of inverter plasma technology provides high-performance control, ensuring a stable arc for smooth and precise cutting surfaces. Additionally, this technology enables effortless "perforated sheet cutting" – the arc remains stable even in sheet gaps, holes, and similar structures. The reduction of ignition energy to approximately 50% compared to other models not only leads to lower energy costs but also extends the lifespan of power nozzles, cutting caps, and torches.
Thanks to a special programme, cutting is even possible on surfaces that are dirty or covered with paint residue. Sheet metal up to a thickness of 6 mm can be cut without any problems, while sheet metal up to a thickness of 8 mm can be cut in rough cut mode.
Scope of delivery:
1 x Plasma Cutter WS 40-i
1 x 174004 Torch kit S25 | WS 40-i
1 x 174016 Ground cable | WS 40-i
1 x Operating instructions (multilingual)
| Air consumption: | 0,045 - 0,075 m³/min |
|---|---|
| Cutting range: | < 6 mm / < 8 mm |
| Effectiveness: | 84 % |
| Fuse: | 16 A (slow) |
| Length × width × height: | 410 x 250 x 180 mm |
| Mains connection (Cu): | 3 × 2,5 mm² |
| Mains voltage: | 230 V |
| Mark of conformity: | CE |
| Open circuit voltage: | 480 V |
| Operating pressure: | 6 bar |
| Operating temperature: | -10 bis 40 °C |
| Power factor: | 0,74 |
| Protection class: | IP 23 |
| Voltage setting range: | 84 - 92 V |
| Weight: | 14,5 kg |
Zubehör
Please log in to see prices
