NA7-26 Wet Separator
Available in 25 days, delivery time 2-5 days
Product information "NA7-26 Wet Separator"
Wet separators are used for the separation of dust and dust particles of various types. These particles are harmlessly bound through introduction into a liquid medium, rendering them non-flammable. Wet separators are particularly suitable for handling aluminum or magnesium dust.
The additionally installed residual dust filter, classified as Class H, also enables the efficient extraction of CFRP dust.
Advantages
- Accurate indication of differential and negative pressure
- Easy emptying and cleaning
- Convenient filter replacement
- High performance despite compact dimensions
- Effective unit cooling
- Optical level monitoring, enhanced with an additional level sensor
Scope of delivery
1 x Wet separator NA7-26
1 x Accessory box
1 x Hose holder | stainless steel | mounted
1 x Cable holder | stainless steel | mounted
1 x Push handle | 350 mm | Ø 20 mm
1 x Plastic hose | 5 m | Ø 50 mm
1 x Curved hand tube | pin on both sides | Ø 50 mm
1 x Hand tube | 1000 mm | Ø 50 mm
1 x Industrial floor nozzle | 500 mm width
1 x Transition: Connection A | 50 mm outer diameter with push pin
Connection B | Storz clutch C 50 mm
1 x Crevice nozzle | 60 x 12 mm | tapered
1 x Mains connection cable | 10 m
| Content: | 7 l |
|---|---|
| Dust class: | H, M |
| Frequency: | 50 - 60 Hz |
| Fuse: | 16 A |
| Labelling: | Zone 22, According to Atex II3D |
| Length × width × height: | 802 x 595 x 755 mm |
| Mains voltage: | 220 - 240 V |
| Mark of conformity: | according to 2006/42/EC |
| Max. negative pressure: | -160 mba |
| Max. volume flow rate: | 220 m³/h |
| Power: | 2,6 - 2,89 kW |
| Protection class: | IP 54 |
| Sound pressure level: | 68 dB(A) |
| Weight: | 98 kg |
