MEC 600 Metal Edge Cutter | Full set with case
Please log in to see prices
Available, delivery time: 2-5 days
Product information "MEC 600 Metal Edge Cutter | Full set with case"
The pneumatic metal edge cutter MEC 600 has been developed for separating weld seams and for the secure and precise removal of the outer body skin. With two different cutting depths for aluminum and steel sheets, it ensures that only as much material is milled off at the wheel arch as necessary for the respective material, without damaging the inner sheet. The adjustable guide of the milling cutter allows for quick and easy adjustment of the MEC 600 to different angular positions of the body panels, while preserving the underlying sheet structure.
Additional advantages
• Innovative HM special cutters for steel and aluminum
• High application safety when breaking laser weld seams (plasma torch seam)
• No sparks when used with cutting oil (BTR Fluid)
• No pre-heat treatment required on the body
Scope of delivery
1 x Milling device
1 x 640053 Machine attachment V2 | MEC 600
1 x 640057 Locking nut | MEC 600
1 x 640063 HM Flat head cutter | LongLife
1 x 640052 Adjustment gauge V2 | MEC 600
1 x 640051 Finger guard | MEC 600
1x Assembling tool
1x Instruction manual
| Air consumption: | 0,56 m³/min |
|---|---|
| Air consumption at idle: | 0,67 m³/min |
| Air humidity: | 10 - 95 % |
| Air quality: | ISO 8573-1 |
| Content: | 1 stück, 1 piece |
| Diameter Ø: | Spannzange: 6,0 mm |
| Length: | 210 mm |
| Length × width × height: | 3320 x 71,9 x 46 mm |
| Mark of conformity: | according to 2006/42/EC |
| Material: | Alu, Aluminium, Plastic, Steel, kunststoff |
| Operating pressure: | < 6,3 bar |
| Operating temperature: | 0 bis 40 °C |
| Power: | 600 W |
| Sound pressure level: | 77 dB(A) |
| Weight: | 2,05 kg |
Zubehör
Excessive operating pressure in pneumatic tools can lead to premature wear and damage. To counteract this problem, a pressure reducing valve is a cost-effective but important solution for every workshop. The valve prevents damage to the tools and thus ensures a longer service life.Maximum inlet pressure: 15 bar Recommended for body saws.
Please log in to see prices
The "ProtectShield" face shield meets EN166 safety standards and provides optimal protection. The polycarbonate visor ensures clarity and impact resistance. The patented visor attachment guarantees stable fixation. The breathable headband enhances comfort, while the wide field of view offers better visibility. The head size can be quickly and easily adjusted, and the adjustment knobs are operable even with gloves.
Please log in to see prices
The mini lubricator reduces wear on pneumatic tools with a 1/4" connection and improves their ease of operation. To prevent sticking or clogging of individual pneumatic components due to over-oiling, the mini lubricator is equipped with a window.
Please log in to see prices
Finger guard for MEC 600. The finger guard must be fitted in the centre of the machine attachment when used on the face side, to cover the cutter in the side window and protect the fingers from possible injury.
Please log in to see prices
The adjustment gauge V2 allows for a secure and fast adjustment of the exact milling depth for sheet metal thicknesses ranging from 0.6 to 1.5 mm.
Please log in to see prices
Machine attachment V2 for the MEC 600 Metal Edge Cutter.
Please log in to see prices
Locking nut for the MEC 600 Metal Edge Cutter.
Please log in to see prices
The flat-head milling cutter specially developed for the MEC 600 enables smooth cutting of aluminium without clogging thanks to its coarse cutting geometry.For optimum results, the special Drill Wax lubricant should be used for every operation. The wax prevents the smearing effect and also prevents the milling cutter from clogging.
Please log in to see prices
The Long Life cutter made of carbide with innovative coating for the MEC 600 has a three times longer service life compared to the comparable standard cutter. The AlTiXN coating enables milling under extreme stress and is particularly resistant to high temperatures, high speeds or particularly high workpiece hardness.For optimum results, the cutting oil 'BTR Fluid' must be used for every milling process.
Please log in to see prices
Serves as a lubricant for the aluminum milling cutter to optimize the application results and increase the tool life of the cutter.
Please log in to see prices
The HM round head cutter with innovative coating was specially designed for cutting laser weld seams (LWS) on car body panels. The AlTiXN coating enables milling under extreme stresses and is particularly resistant to high temperatures, high speeds or especially high workpiece hardness.For optimum results, the cutting oil 'BTR Fluid' must be used for every milling process.
Please log in to see prices
The starter set expands the range of applications of the MEC 600 edge milling cutter in the standard version and increases the service life of the cutters with suitable cutting materials.Laser welding seams can be cut with the round head cutter and aluminium can be machined with the ALU flat head cutter. The DrillWax serves as a lubricant for the ALU milling cutter to optimise the application result and increase the service life of the milling cutter. The cutting oil should be used in every milling application on steel bodies as part of the repair process. The finger guard must be fitted in the centre of the machine attachment when used on the face side, to cover the cutter in the side window and protect the fingers from possible injury.Scope of delivery 1 x 640069 HM Round head cutter for LWS | LongLife1 x 640062 HM Flat head cutter for ALU1 x 640051 Finger guard | MEC 6001 x 640068 Drill wax stick | MEC 6001 x 628000 BTR/BOR Fluid | 125 ml
Please log in to see prices
The PU-coated protective gloves offer excellent grip. The half-coated, elastic, and seamless design ensures that the tactile feel in the fingertips is well preserved, while providing high comfort during wear.
Please log in to see prices
The PU-coated protective gloves offer excellent grip. The half-coated, elastic, and seamless design ensures that the tactile feel in the fingertips is well preserved, while providing high comfort during wear.
Please log in to see prices
The PU-coated protective gloves offer excellent grip. The half-coated, elastic, and seamless design ensures that the tactile feel in the fingertips is well preserved, while providing high comfort during wear.
Please log in to see prices