Edge milling tool MEC600 pneumatic
Please log in to see prices
Available in 4 days, delivery time 2-5 days
Product information "Edge milling tool MEC600 pneumatic"
The pneumatic metal edge cutter MEC 600 has been developed for separating weld seams and for the secure and precise removal of the outer body skin. With two different cutting depths for aluminum and steel sheets, it ensures that only as much material is milled off at the wheel arch as necessary for the respective material, without damaging the inner sheet. The adjustable guide of the milling cutter allows for quick and easy adjustment of the MEC 600 to different angular positions of the body panels, while preserving the underlying sheet structure.
Additional advantages
• Innovative HM special cutters for steel and aluminum
• High application safety when breaking laser weld seams (plasma torch seam)
• No sparks when used with cutting oil (BTR Fluid)
• No pre-heat treatment required on the body
Scope of delivery
1 x Milling device
1 x 640053 Machine attachment V2 | MEC 600
1 x 640057 Locking nut | MEC 600
1 x 640063 HM Flat head cutter | LongLife
1 x 640052 Adjustment gauge V2 | MEC 600
1 x 640051 Finger guard | MEC 600
1x Assembling tool
1x Instruction manual
| Air consumption: | 0,56 m³/min |
|---|---|
| Air consumption at idle: | 0,67 m³/min |
| Air humidity: | 10 - 95 % |
| Content: | 1 stück, 1 piece |
| Length: | 210 mm |
| Mark of conformity: | according to 2006/42/EC |
| Material: | Alu, Aluminium, Plastic, Steel, kunststoff |
| Operating pressure: | 6,3 bar |
| Operating temperature: | 0 bis 40 °C |
| Power: | 600 W |
| Sound pressure level: | 77 dB(A) |
| Weight: | 2,05 kg |
Zubehör
The silicone-free cutting oil BTR Fluid increases the service life of cutters, drills, and saw blades when processing high-strength automotive body steel, ensuring optimal cutting performance.
Please log in to see prices
Excessive operating pressure in pneumatic tools can lead to premature wear and damage. To counteract this problem, a pressure reducing valve is a cost-effective but important solution for every workshop. The valve prevents damage to the tools and thus ensures a longer service life.Maximum inlet pressure: 15 bar Recommended for body saws.
Please log in to see prices
The mini lubricator reduces wear on pneumatic tools with a 1/4" connection and improves their ease of operation. To prevent sticking or clogging of individual pneumatic components due to over-oiling, the mini lubricator is equipped with a window.
Please log in to see prices
The Long Life cutter made of carbide with innovative coating for the MEC 600 has a three times longer service life compared to the comparable standard cutter. The AlTiXN coating enables milling under extreme stress and is particularly resistant to high temperatures, high speeds or particularly high workpiece hardness.For optimum results, the cutting oil 'BTR Fluid' must be used for every milling process.
Please log in to see prices
The HM round head cutter with innovative coating was specially designed for cutting laser weld seams (LWS) on car body panels. The AlTiXN coating enables milling under extreme stresses and is particularly resistant to high temperatures, high speeds or especially high workpiece hardness.For optimum results, the cutting oil 'BTR Fluid' must be used for every milling process.
Please log in to see prices