Axial grinder GTC-082A/SW
Please log in to see prices
Available, delivery time: 2-5 days
Product information "Axial grinder GTC-082A/SW"
Pneumatic axial grinder GTC-082A/SW.
| Air consumption: | 0,085 m³/min |
|---|---|
| Air quality: | ISO 8573-1 |
| Content: | 1 stück, 1 piece |
| Diameter Ø: | Spannzange: 6 mm |
| Length × width × height: | 225 x 72 x 28 mm |
| Material: | Alu, Aluminium die-cast, Plastic, kunststoff |
| Operating pressure: | 6 bar |
| Power: | 400 W |
| Sound pressure level: | 87 dB(A) |
| Speed: | 20000 U/min |
| Vibration: | 2,5 m/s² |
| Weight: | 0,685 kg |
Zubehör
21-piece set containing cutting discs and a mandrel.Scope of delivery 1 x 637020 Mandrel for cutting discs with 6 mm hole10 x Cutting discs | Ø 30 × 1,0 × 6 mm10 x Cutting discs | Ø 50 × 1,0 × 6 mm
Please log in to see prices
Mandrel for cutting discs with a shaft diameter of 6 mm. Suitable for cutting discs with a 6 mm deep hole and a thickness ranging from 0 to 4 mm.
Please log in to see prices
Solid carbide burr with a small conical head for post-processing weld seams.
Please log in to see prices
Solid carbide burr with a big cone shaped head for post-processing weld seams.
Please log in to see prices
Solid carbide burr with a round shaped head for post-processing weld seams.
Please log in to see prices
Solid carbide burr with a cylindrical dome-shaped head for post-processing ALU weld seams.
Please log in to see prices
Solid carbide burr with a round-shaped head for post-processing ALU weld seams.
Please log in to see prices
Solid carbide burr in conical shape with a round head for post-processing ALU weld seams.
Please log in to see prices
Abrasive set for the gentle removal of paint and dirt from sheet metal. Leaves a completely cleaned surface for the next phases of coating, painting or soldering.Scope of delivery2 x 617080 CSD sanding disc1 x 618011 Mandrel for CSD sanding disc
Please log in to see prices
The mini lubricator reduces wear on pneumatic tools with a 1/4" connection and improves their ease of operation. To prevent sticking or clogging of individual pneumatic components due to over-oiling, the mini lubricator is equipped with a window.
Please log in to see prices
Excessive operating pressure in pneumatic tools can lead to premature wear and damage. To counteract this problem, a pressure reducing valve is a cost-effective but important solution for every workshop. The valve prevents damage to the tools and thus ensures a longer service life.Maximum inlet pressure: 15 bar Recommended for body saws.
Please log in to see prices
This high-performance oil is specifically designed for use in air mist lubricators and maintenance units for tools and pneumatic systems in accordance with DIN 51524-2. With a viscosity of 32 mm²/s at 40 °C, it corresponds to viscosity class VG 32 according to ISO 3448. Additionally, it exceeds the basic requirements for hydraulic oils of type HLP, delivering particularly reliable and high-performance results. Thanks to its high resistance to aging and its active protection against corrosion and wear, the oil ensures long-lasting and trouble-free operation. Its excellent viscosity-temperature behavior – even at low temperatures – as well as outstanding demulsifying properties complete its premium performance profile.
Please log in to see prices
Clear, 4-coated glasses with two sets of temples - classic or straight.
Please log in to see prices
Knotted round brush made of stainless steel with a wire diameter 0.5 mm.
Please log in to see prices
Knotted conical brush with a wire diameter of 0.5 mm.
Please log in to see prices
Knotted round brush with a wire diameter of 0.5 mm.
Please log in to see prices
Knotted brush with a wire diameter of 0.35 mm.
Please log in to see prices
Brass-plated round brush with a wire diameter of 0.3 mm.
Please log in to see prices