Variant item
InvertaPuls IP 6-2 ACT | 3 × 400 V | Steel/Solder
Item no: 331006
The Inverter MIG-MAG welding machine for body repair with ACT (Automotive Cold Transfer) offers a range of impressive features that make it the ideal choice for vehicle body repair. With two welding torches for two wires, it enables efficient operation while focusing on superior thin sheet welding. Features • Synergy parameters• Lower heat input• Very good gap bridging• Less material distortion• Automatic "hold function" of the welding parameters• Saving of individual welding programs• Integrated interface for software updatesEquipped with: 2 x 337220 Wire feed rollers | steel | 0.8 mm & 1.0 mm1 x 308101 Torch Force 200 | ALU welding | 3.0 m1 x 308103 Torch Force 200 | Steel welding | 3.0 m1 x 304053 Ground cable with clamp | 5 m | 35 mm² | SK 351 x 311042 Pressure reducer ProControl | 200 bar (DE and AT only)1 x 311044 Double branch valve 1/4" for manometer (DE and AT only)1 x operating instructions
Variant item
InvertaPuls IP 7-2 ACT | 3 × 400 V | Steel/Solder
Item no: 331026
The InvertaPuls IP 7-2 impresses with its effortless operation thanks to a simple, easy-to-understand interface. The four extra-large 37 mm drive rollers provide a large contact surface for the welding wire, which enables optimum wire feed. With two torches, ergonomic torch removal and a slim design, the IP 7-2 is perfect for any use in body shops.Features • Automatic torch recognition• Higher welding speed• Lower heat input• Very good gap bridging• Less material distortion• Automatic "hold function" of the welding parameters• Welding programmes for: MIG soldering (CuSi3, AlBz8, CuAl8) | steel/stainless steel | aluminium | TIG | flux-cored wire | electrode welding• Lower heat input• Saving of individual welding programs• Integrated interface for software updatesEquipped with: 1 x 337219 Wire feed rollers | steel | 0.6 mm & 0.8mm | PU: 2 pcs.1 x 337220 Wire feed rollers | steel | 0.8 mm & 1.0 mm | PU: 2 pcs.1 x 308110 Torch 3G | Steel welding | 3.0 m1 x 308116 Torch 3G | MIG soldering (CuSi3) | 3.0 m1 x 304053 Ground cable with clamp | 5 m | 35 mm² | SK 352 x 311042 Pressure reducer ProControl | 200 bar (only DE and AT)1 x 311044 Double branch valve 1/4" for manometer (only DE and AT)1 x 307060 Contact tips M6 x 28 mm | 10-piece set1 x User manual
Variant item
InvertaPuls IP 4-3 | 3 × 400 V | 240 A
Item no: 341298
The InvertaPuls IP 4-3 is the ideal welding machine for steel welding and MIG brazing, perfectly tailored to the needs of bodywork professionals. Equipped with connections for up to three torches and automatic torch recognition, it enables easy handling and maximum flexibility. Thanks to the automatic "hold function" of the welding parameters and the robust wire feed unit with 4-roller drive, the InvertaPuls IP 4-3 guarantees maximum efficiency and precision in every application. Features• Automatic torch recognition• Higher welding speed• Lower heat input• Very good gap bridging• Less material distortion• Automatic "hold function" of the welding parameters• Welding programmes for: MIG soldering (CuSi3, AlBz8, CuAl8) | steel/stainless steel | aluminium | TIG | flux-cored wire | electrode welding • Lower heat input• Saving of individual welding programs• Integrated interface for software updatesEquipped with: 1 x 337219 Wire feed rollers | steel | 0.6 mm & 0.8mm | PU: 2 pcs.1 x 337220 Wire feed rollers | steel | 0.8 mm & 1.0 mm | PU: 2 pcs.1 x 337221 Wire feed rollers | aluminium | 1.0 mm & 1.2 mm | PU: 2 pcs.1 x 308110 Torch 3G | Steel welding | 3.0 m1 x 308111 Torch 3G | ALU welding | 3.0 m1 x 308116 Torch 3G | MIG soldering (CuSi3) | 3.0 m1 x 304053 Ground cable with clamp | 5 m | 35 mm² | SK 352 x 311042 Pressure reducer ProControl | 200 bar (only DE and AT)1 x 311044 Double branch valve 1/4" for manometer (only DE and AT)1 x 307060 Contact tips M6 x 28 mm | 10-piece set1 x User manual
Welding inverter IM 240-3 | 230 V | with Spool-Gun
Item no: 341293
The IM 230-3 is the perfect partner for steel welding, aluminum welding, and MIG soldering. This 2-burner MIG/MAG inverter welding system offers synergy-regulated technology for maximum precision and user-friendliness.With the intuitive 2-button control, switching between different welding processes is effortless. The powerful welding current of up to 200 A and the modern 230 V inverter technology ensure top-notch results. The 3-burner system allows for the connection of up to two gas cylinders, while the connection for a spool gun expands the range of applications.Equipped with: 1 x 308115 Spool-Gun torch2 x 337220 Wire feed rollers | steel | 0.8 mm & 1.0 mm1 x 308102 Torch Force 200 | MIG soldering (CuSi3) | 3.0 m1 x 308103 Torch Force 200 | Steel welding | 3.0 m1 x ground cable with clamp | 4 m2 x connection cable for shielding gas1 x pressure cylinder holder for 2 × 20 liters1 x operating instructions
TIG 200 welding machine | AC/DC
Item no: 331051
With a dynamic pulsed arc, this machine offers increased productivity and enables faster welding with improved arc control. Easy operation is supported by automatic pulse settings, while the ability to TIG and MMA weld offers maximum flexibility.Automatic current modulation ensures optimum power adjustment, while the 5 metre supply cable provides sufficient freedom of movement. A digital display for volts and amps and Synergy settings offer precise control over the welding process, while the Active Boost system provides additional power.Equipped with: 1 x 332222 TIG torch SR 26 | with manual gas valve | 4 m 1 x Ground cable | 4 m 1 x Operating instructions
Welding inverter IM 240-3 | 230 V
Item no: 341292
The IM 230-3 is the perfect partner for steel welding, aluminum welding, and MIG soldering. This 2-burner MIG/MAG inverter welding system offers synergy-regulated technology for maximum precision and user-friendliness.With the intuitive 2-button control, switching between different welding processes is effortless. The powerful welding current of up to 200 A and the modern 230 V inverter technology ensure top-notch results. The 3-burner system allows for the connection of up to two gas cylinders, while the connection for a spool gun expands the range of applications.Equipped with: 2 x 337220 Wire feed rollers | steel | 0.8 mm & 1.0 mm1 x 308102 Torch Force 200 | MIG soldering (CuSi3) | 3.0 m1 x 308103 Torch Force 200 | Steel welding | 3.0 m1 x ground cable with clamp | 4 m2 x connection cable for shielding gas1 x pressure cylinder holder for 2 × 20 liters1 x operating instructions
Welding inverter IM 240-i | USA
Item no: 341291
The IM 240-i welding machine is a compact MIG-MAG welding inverter specially developed for car body repairs. A unique advantage is the excellent MIG soldering characteristic. The very good steel welding characteristics enable all types of repairs to be carried out on vehicles with very good results. Equipped with: 1 x 337219 Wire feed rollers | steel | 0.6 mm & 0.8mm 1 x 308103 Torch Force 200 | Steel welding | 3.0 m 1 x Ground cable | 4 m 1 x Operating instructions The USA version is supplied with cable but without plug.
Welding inverter IM 240-i | 230 V
Item no: 341290
The IM 240-i welding machine is a compact MIG-MAG welding inverter specially developed for car body repairs. A unique advantage is the excellent MIG soldering characteristic. The very good steel welding characteristics enable all types of repairs to be carried out on vehicles with very good results.Equipped with: 1 x 337219 Wire feed rollers | steel | 0.6 mm & 0.8mm 1 x 308103 Torch Force 200 | Steel welding | 3.0 m 1 x Ground cable | 4 m 1 x Operating instructions
Welding inverter IM 240-Eco | 230 V
Item no: 341288
The IM 240-Eco welding machine is a compact MIG-MAG welding inverter specially developed for car body repairs. A unique advantage is the excellent MIG soldering characteristic. The very good steel welding characteristics enable all types of repairs to be carried out on vehicles with very good results.Equipped with: 1 x 337219 Wire feed rollers | steel | 0.6 mm & 0.8mm 1 x 308103 Torch Force 200 | Steel welding | 3.0 m 1 x Ground cable | 4 m 1 x Operating instructions
Variant item
Welding wire CuSi3 | Ø 1.0 mm | K300 | 15 kg
Item no: 311019
The CuSi3 welding wire with a diameter of 1.0 mm is wound on a K300 basket spool made of copper-silicon alloy and has a low melting point. It is excellent for both TIG and MIG welding (soldering) of galvanized steel sheets in body construction. In this process, the corrosion protection of galvanized surfaces is largely preserved, and usually, preheating of the base material is not required.It is recommended to keep the weld pool not too wide and to pay attention to low heat input. In MIG welding with a short arc/impulse method, as well as in TIG welding, it is advisable to introduce as much weld material as possible.Applicable shielding gases (EN ISO 14175) for TIG: Argon I1, for MIG: Argon I1, I3.
Variant item
Torch 3G | ALU welding | 3.0 m
Item no: 308111
With its compact black mini handle, this welding torch combines maneuverability and optimal accessibility, even in challenging space conditions.
Spool-Gun torch
Item no: 308115
The spool gun torch is characterized by its Euro central connection, sturdy construction and 3 m cable with breakage protection. It is specifically designed for welders who do not want to constantly change the wire while welding stainless steel or aluminum. The profile-compatible spool gun is intended for M6 power nozzles and 100 mm welding wire spools with a welding wire diameter of 0.6 to 0.8 mm. It offers continuously adjustable wire speed, roller mount and cable entry made of durable metal.
Variant item
Torch MB 24 | Steel welding | 3.0 m
Item no: 308105
The 3 meter long hose package MB 24 including a power nozzle and a blue handle has specifically been pre-configured for steel welding. The handle has been designed for maximum ergonomics and has an appealing look. The soft rubber surfaces that are integrated into the handle ensure optimal and non-slip handling. The balanced weight distribution of the torch allows for extremely comfortable work.Product information• Modern two-component handle• Extremely slim design for comfortable work• Ball joint with defined swivel and rotation range to prevent cable entanglement in the hose package• Efficient weight distribution for maximum energy savings• The handle area is further away from the arc source, reducing the heat impact on the hand noticeably
TIG torch | hand gas valve
Item no: 332222
TIG welding torch including a 1.6 mm tungsten inert gas electrode and a hand gas valve for the InvertaPuls series. The machines are equipped with a TIG function with permanent output and automatic arc ignition between the tungsten electrode and the workpiece. Additionally, the welding torch features an integrated mechanical gas valve.
Variant item
Welding wire CuAl8 | Ø 1.0 mm | D200 | 5 kg
Item no: 311073
The CuAl8 welding wire with a diameter of 1.0 mm is wound on a D200 plastic spool. It is made of a copper-aluminum alloy and is suitable for both TIG and MIG welding. This wire variant is characterized by its corrosion and seawater resistance, and it also offers good sliding properties. Preheating is only required for large workpieces (approximately 250 °C).The main application areas of this welding wire include copper-aluminum alloys such as aluminum bronze with an aluminum content of 7 - 9 %, as well as copper and copper-zinc alloys (brass). Additionally, it is suitable for overlay welding on unalloyed and low-alloy steels and cast iron.For the first layer of overlay welding on iron materials, pulse arc welding is recommended. In TIG welding, flux should also be used to prevent the formation of oxides.Applicable shielding gases (EN ISO 14175) for TIG/MIG: Argon I1
Variant item
Torch Force 200 | MIG soldering (CuSi3) | 3.0 m
Item no: 308102
The preconfigured torch for MIG-soldering is equipped with a PTFE liner and a green handle.
Variant item
Welding wire NiMoCr | Ø 0.8 mm | K300 | 15 kg
Item no: 311010
The welding wire NiMoCr with a diameter of 0.8 mm is wound on a K300 basket spool. It is made of low-alloy steel suitable for the MAG welding of quenched and tempered fine-grain steels. The weld metal is suitable for operating temperatures ranging from -40 °C to 350 °C.The mechanical properties of the weld metal strongly depend on the shielding gas used. Optimal welding performance is achieved when using mixed gas M21. It is possible to weld the wire in both short-circuit and spray arc ranges. The required preheating temperature varies depending on the base material used. It is important to note that the interpass temperature should not exceed 200 °C.
Variant item
Welding wire AlMg5 | Ø 1.0 mm | K300 | 7 kg
Item no: 311015
The welding wire AlMg5 with a diameter of 1.0 mm is wound on a K300 basket spool. It is composed of an aluminum-magnesium alloy and is suitable for TIG and MIG welding of aluminum alloys. In the case of large workpieces and wall thicknesses exceeding 15 mm, preheat the welding joint area to 150 °C.Applicable shielding gases (EN ISO 14175): TIG - Argon I1, MIG - Argon I1, and Argon-Helium mixtures I3
Torch hanger | for 3 torches
Item no: 337204
Torch hanger for securing three torches. Suitable for the InvertaPuls and IM 240 machines.
Sheet adapter for IP 6-2 | for second gas bottle
Item no: 311045
To extend the support for a second gas cylinder. We recommend 10 litre gas cylinders if two cylinders are fitted.Scope of delivery 1 x adapter plate2 x foam spacer4 x ISKA countersunk head screw M8 x 40 mm | burnished4 x M8 nut | self-locking
Variant item
Welding wire Union X96 | Ø 0.8 mm | D200 | 5 kg
Item no: 311087
The welding wire Union X96 with a diameter of 0.8 mm is a high-strength MAG welding wire with Honda approval. With a nominal strength of 980 MPa (142 ksi), it is specifically designed for MAG welding on steel parts with a strength ranging from 590 to 980 MPa. Additionally, this wire is excellent for MAG welding on steel parts with a strength in the range of 270 to 440 MPa. The Union X96 welding wire is also available in a 15 kg K300 coil (item no. 311007)
Variant item
Welding wire SG2 Ti vb | Ø 0.8 mm | K300 | 15 kg
Item no: 311002
The welding wire SG2 Ti vb with a diameter of 0.8 mm is coated with bronze, providing additional protection against corrosion. It is wound on a K300 spool and is made of low-alloy steel, specifically designed for MAG welding of unalloyed and low-alloyed steels. This welding wire is particularly well-suited for overlaying manufacturing coatings (primers), zinc protective layers, as well as rusted components. The weld produced by this wire is resistant to aging and can be used at operating temperatures ranging from -10 °C to 450 °C.
Wire feed rollers | aluminium | 1.0 mm & 1.2 mm
Item no: 337221
Wire feed rollers with 37 mm diameter for wire diameters of 1.0 mm and 1.2 mm.
Wire feed rollers | steel | 0.6 mm & 0.8 mm
Item no: 337219
Wire feed rollers with 37 mm diameter for wire diameters of 0.6 mm and 0.8 mm.
Wire feed rollers | steel | 0.8 mm & 1.0 mm
Item no: 337220
Wire feed rollers with 37 mm diameter for wire diameters of 0.8 mm and 1.0 mm.
Pressure reducer ProControl | 200 bar
Item no: 311042
Pressure reducer for all common applications with technical gases. Manufactured according to the highest safety standards of ISO 2503. The robust rubber protective cap is rear-sealed for optimal all-round protection against damage and contamination. Long lifespan resulting in cost savings for servicing, spare parts, and repairs. Latest Encapsulated Technology for precise and stable control behavior, ensuring a process-secure, simple, and user-friendly operation. Additional product information • Working pressure gauge double scale Argon 5, 32 l/min - red line at 24 l/min - CO2 5, 30 l/min - red line at 23 l/min• Content manometer 0 - 315 / 200 bar - red line at 200 bar
Crack diagnosis spray | 3-piece set
Item no: 311053
Aluminum crack testing is used to check for damage in the inner microstructure of the metal.Very often, large areas need to be checked for cracking in order to check whether other body parts have been affected by a crash. A typical example of this is the MacPherson strut area.The diffusion red penetrant is applied to the surface to be tested. Due to its properties and capillary force, it penetrates the finest cracks and pores and is drawn back to the surface after cleaning with the developer. Due to the high contrast to the white developer, even the smallest cracks and defects can be detected.Note: The liquids and agents have no negative properties on welds or on the surfaces on which they are used, they can be easily removed from the surfaces with the test agent cleaner without leaving any residue.Application:1. clean the surface thoroughly with CLEANER Ardrox 9PR5.2. apply PENETRATION SPRAY Ardrox 9VF2 and leave to work for approx. 10 - 20 minutes.3 Thoroughly clean the surface again with CLEANER Ardrox 9PR5.4. apply DEVELOPER SPRAY Ardrox 9D1B until reaction.5. check the surface for cracks.
PTFE liner ALU | 3.5 m | red | with copper spiral
Item no: 337108
Plastic liner in black including a 22 cm copper spiral for MIG soldering with a wire diameter of 1.0 mm and 1.2 mm. The liner is installed within the torch cable and is used to guide the welding wire from the feeder to the welding point. To ensure a stable wire feed, a timely replacement of the liners is recommended.
Variant item
Welding wire AlMg2,7Mn | Ø 1.0 mm | D200 | 2 kg
Item no: 311086
The welding wire AlMg2.7Mn with a diameter of 1.0 mm is wound on a D200 plastic spool. It is made of an aluminum-magnesium alloy with manganese content (weld seam must be metallurgically clean) and is suitable for TIG and MIG welding of aluminum alloys.Applicable shielding gases (EN ISO 14175) for TIG: Argon I1, MIG: Argon I1, and Argon-Helium mixtures I3
Plastic liner | MIG soldering | 3.5 m | black
Item no: 337109
Plastic liner in black including a 22 cm copper spiral for MIG soldering with a wire diameter of 0.8 mm and 1.0 mm. The liner is installed within the torch cable and is used to guide the welding wire from the feeder to the welding point. To ensure a stable wire feed, a timely replacement of the liners is recommended.
PTFE liner ALU | 4.5 m | red
Item no: 337015
PTFE liner in red for aluminum and stainless steel wire with a wire diameter of 1.0 mm and 1.2 mm. The liner is installed within the torch cable and is used to guide the welding wire from the feeder to the welding point. To ensure a stable wire feed, a timely replacement of the liners is recommended.
PTFE liner | MIG-MAG | 3.5 m | blue
Item no: 337139
PTFE liner in blue for aluminum and stainless steel wire with a wire diameter of 0.8 mm and 1.0 mm. The liner is installed within the torch cable and is used to guide the welding wire from the feeder to the welding point. To ensure a stable wire feed, a timely replacement of the liners is recommended.
Swan neck | standard | MB 15
Item no: 307021
Swan neck M10 for welding torch MB 15 including gas nozzle holder, protective sleeve and retaining spring.
Variant item
Welding wire AlSi12 | Ø 1.2 mm | D200 | 2 kg
Item no: 311081
The welding wire AlSi12 with a diameter of 1.2 mm is wound on a D200 plastic spool. It is made of an aluminum-silicon alloy (aluminum casting alloys) and is suitable for TIG and MIG welding of aluminum-silicon alloys. Applicable shielding gases (EN ISO 14175) for TIG: Argon I1, for MIG: Argon I1, and Argon-Helium mixtures I3
Polyamide plastic liner | 3.5 m | black
Item no: 337147
PA liner in black for aluminum wire with a wire diameter of 0.8 mm and 1.0 mm. The liner is installed within the torch cable and is used to guide the welding wire from the feeder to the welding point. To ensure a stable wire feed, a timely replacement of the liners is recommended.
Variant item
ALU nozzles | Ø 1.2 mm | 10 pcs.
Item no: 337117
Contact nozzle for aluminium welding made of CuCrZr. Suitable for the SBT 307 G welding torch.
PTFE liner | MIG-MAG | 3.5 m | red
Item no: 337142
PTFE liner in red for aluminum and stainless steel wire with a wire diameter of 1.0 mm and 1.2 mm. The liner is installed within the torch cable and is used to guide the welding wire from the feeder to the welding point. To ensure a stable wire feed, a timely replacement of the liners is recommended.
Variant item
Steel/MIG nozzles | Ø 1.0 mm | 10 pcs.
Item no: 337116
Contact nozzle made of CuCrZr. Suitable for the SBT 307 G welding torch.
Variant item
Welding wire SG2 | Ø 0.6 mm | D200 | 5 kg
Item no: 311093
The welding wire SG2 with a diameter of 0.8 mm is wound on a D200 plastic spool. It is particularly suitable for the MIG/MAG welding process and ensures a precise and stable weld seam. The special composition of the wire enables optimal welding performance, minimizing spatter formation. The welding wire is suitable for welding carbon steel, single and multi-layer welding of non-alloy and low-alloy steels, structural steels, and occasionally stainless steel.