Car Lift HLT-17o | pneumatic | 3.5 t | 135.5 cm
Item no: 851051
With the HLT lifts, the load can be lifted either standing on the wheels or "wheel-free" via the swivelling support arms. The wheel support surfaces are equipped with grids, and the middle section can be folded down to enable work on the sill. The support arms can be swivelled, have a locking mechanism and can be removed if necessary. In order to lift "wheel-free", the frame is uncoupled from the platform body in lowered position by means of an easily accessible slide construction. The load capacity for both lifting options is 3.5 tonnes. The base frame, the grating and the drive-over protection are galvanised as standard on all lifts.Attention!The base frame of the lift must be bolted to the floor to prevent the lift from moving.• Raise the platform base once and lower it again• Align the platform• Screw the platform to the floor to prevent it from moving
Car Lift HLW-17o | pneumatic | 3.5 t | 135.5 cm
Item no: 851053
On the HLW platforms, the load is lifted upright on the wheels. The wheel contact surfaces are equipped with grates, and the middle section can also be folded down to enable work on the sill. With a load capacity of 3.5 tonnes, heavier vehicles with a longer wheelbase can be lifted. The base frame, the grates and the drive-over protection are galvanised as standard on all lifts.Attention!The base frame of the lift must be bolted to the floor to prevent the lift from moving.• Raise the platform base once and lower it again• Align the platform• Screw the platform to the floor to prevent it from moving
Car Lift HLT-13o | pneumatic | 3.5 t | 100 cm
Item no: 851050
With the HLT lifts, the load can be lifted either standing on the wheels or "wheel-free" via the swivelling support arms. The wheel support surfaces are equipped with grids, and the middle section can be folded down to enable work on the sill. The support arms can be swivelled, have a locking mechanism and can be removed if necessary. In order to lift "wheel-free", the frame is uncoupled from the platform body in lowered position by means of an easily accessible slide construction. The load capacity for both lifting options is 3.5 tonnes. The base frame, the grating and the drive-over protection are galvanised as standard on all lifts.Attention!The base frame of the lift must be bolted to the floor to prevent the lift from moving.• Raise the platform base once and lower it again• Align the platform• Screw the platform to the floor to prevent it from moving
WS glass lift
Item no: 881230
The glass lift facilitates the removal and installation of large and heavy windscreens on buses, trucks or rail vehicles. The WS glass lift has a glass suction unit consisting of 3 vacuum suction cups with manometers with a maximum load capacity of 280 kg. When extended, the lift has a height of approx. 3.50 metres. It can also be used to replace the upper windscreen of a large coach, for example.Benefits• good handling and manoeuvrability in confined spaces and on uneven surfaces• extendable base construction from 770 to 1160 mm for maximum stability• removable support legs with castors and parking brake• 8 x pneumatic tyres for quick and easy loading/unloading into transport vehiclesScope of delivery1 x 881232 Glass suction holder with 3 suction cups | max. 210 kg1 x 881231 Crane extension arm | 830 mm | max. 170 kg1 x 881235 Glass support
Car Lift HLW-13o | pneumatic | 3.5 t | 100 cm
Item no: 851052
On the HLW platforms, the load is lifted upright on the wheels. The wheel contact surfaces are equipped with grates, and the middle section can also be folded down to enable work on the sill. With a load capacity of 3.5 tonnes, heavier vehicles with a longer wheelbase can be lifted. The base frame, the grates and the drive-over protection are galvanised as standard on all lifts.Attention!The base frame of the lift must be bolted to the floor to prevent the lift from moving.• Raise the platform base once and lower it again• Align the platform• Screw the platform to the floor to prevent it from moving
WS Lifter 1.4T | Remote Control
Item no: N851025-NV
A versatile mobile lift table designed for the safe dismantling and storage of components such as electric vehicle batteries, motors* and gearboxes*. The lift table also serves as a means of transporting the parts and as a work surface. Its hydraulic cylinder is driven by a pneumohydraulic pump, while a hydraulic safety device ensures the controlled lowering of the lift table. It is conveniently operated via a remote control.Advantages• load capacity max. 1.4 t• lifting height max. 1800 mm • mechanical drop safety device• adjustable 3-stage handle• inclination of longitudinal axis +/- 1• inclination of transverse axis +/- 4.5°• width of surface: 800 mm• length of surface: 1830-2130 mm (extendable)• 2 x 360° castors with directional lock• 2 x 360° castors with parking brake*Can only be used with optional accessories (not included in the scope of delivery) - 851026NV JIGS | adapter set | new version
WS Lifter 1.4T | Remote Control
Item no: 851028NV
A versatile mobile lift table designed for the safe dismantling and storage of components such as electric vehicle batteries, motors* and gearboxes*. The lift table also serves as a means of transporting the parts and as a work surface. Its hydraulic cylinder is driven by a pneumohydraulic pump, while a hydraulic safety device ensures the controlled lowering of the lift table. It is conveniently operated via a remote control.Advantages• load capacity max. 1.0 t• lifting height max. 1800 mm• mechanical drop safety device• adjustable 3-stage handle• inclination of longitudinal axis +/- 1• inclination of transverse axis +/- 4.5°• length of surface: 792-1820 mm (extendable)• 2 x 360° castors with directional lock• 2 x 360° castors with parking brake*Can only be used with optional accessories (not included in the scope of delivery) - 851026NV JIGS | adapter set | new version
Minilift Low | basic set | 2.2 t
Item no: 851022
Scope of delivery 1 × Minilift 2 × Support stand 2 × Transport castors
Tool trolley with telescopic rear panel
Item no: 881200
The high-quality, lockable tool trolley with a telescopic back panel offers the ideal solution for safe and organized tool storage. Equipped with multiple full-extension drawers, it ensures quick access and maximum visibility. The sturdy perforated back panel is perfect for customized tool placement, keeping all essential items easily accessible and neatly arranged.
MegaVac | full set
Item no: 842063
The MegaVac is a professional glass repair system that offers all the necessary products for a successful start in automotive glass repair. It is suitable for both beginners and experienced professionals.The system is characterised by its high quality, which leads to excellent repair results. It has been specially developed to adapt flexibly to different temperature conditions and various types of stone chip damage.The MegaVac's dual injector enables rapid switching between high vacuum and positive pressure. This efficiently draws and pushes the repair adhesive into the cracks to ensure an optimal repair.• Kit with resin for approx. 200-250 repairs• Repair time approx. 5-10 minutesScope of delivery 1 x 848100 Injector | MegaVac1 x 848101 Stand | MegaVac1 x 848127 UV-BAT | 3.7 V | MegaVac1 x 848123 Mini Drill | 4.2 V | battery-operated | MegaVac1 x 848121 Carbide drill bit | Ø 0.7 mm | round | MegaVac | PU: 5 pcs.1 x 848109 Pro2010 | 15 ml | MegaVac1 x 848110 Pro2015+ | 15 ml | MegaVac1 x 848111 Pitfiller | 15 ml | MegaVac1 x 848104 Pitpolish | 30 ml | MegaVac1 x 848103 Polishing Cork | MegaVac1 x 848118 Flexstick | MegaVac1 x 848107 Mirror | MegaVac2 x 848128 Gasket set | MegaVac | PU: 3 pcs.1 x 848105 Pro Seal Lube | 5 ml | MegaVac1 x 848106 Pro Filmtabs | MegaVac | PU: 10 pcs.1 x 848117 Scraper blade | MegaVac | PU: 10 pcs.1 x 848134 Safety glasses with UV-protection | MegaVac1 x 848136 Flash drive | MegaVac1 x Case
Tool Trolley R230
Item no: 881201
Lockable tool trolley R230 made of powder-coated steel for the workbay. Features • Steel top• 8 drawers• 2 fixed casters• 2 swivel casters with locking brake
MegaVac | standard set | without drill
Item no: 842060
The MegaVac is a professional glass repair system that offers all the necessary products for a successful start in automotive glass repair. It is suitable for both beginners and experienced professionals.The system is characterised by its high quality, which leads to excellent repair results. It has been specially developed to adapt flexibly to different temperature conditions and various types of stone chip damage.The MegaVac's dual injector enables rapid switching between high vacuum and positive pressure. This efficiently draws and pushes the repair adhesive into the cracks to ensure an optimal repair.• Kit with resin for approx. 200-250 repairs• Repair time approx. 5-10 minutesScope of delivery 1 x 848100 Injector | MegaVac1 x 848101 Stand | MegaVac1 x 848127 UV-BAT | 3.7 V | MegaVac1 x 848109 Pro2010 | 15 ml | MegaVac1 x 848110 Pro2015+ | 15 ml | MegaVac1 x 848111 Pitfiller | 15 ml | MegaVac1 x 848104 Pitpolish | 30 ml | MegaVac1 x 848103 Polishing Cork | MegaVac1 x 848118 Flexstick | MegaVac1 x 848107 Mirror | MegaVac2 x 848128 Gasket set | MegaVac | PU: 3 pcs.1 x 848105 Pro Seal Lube | 5 ml | MegaVac1 x 848106 Pro Filmtabs | MegaVac | PU: 10 pcs.1 x 848117 Scraper blade | MegaVac | PU: 10 pcs.1 x 848134 Safety glasses with UV-protection | MegaVac1 x 848136 Flash drive | MegaVac1 x Case
MegaVac | basic set
Item no: 842062
The MegaVac is a professional glass repair system that offers all the necessary products for a successful start in automotive glass repair. It is suitable for both beginners and experienced professionals.The system is characterised by its high quality, which leads to excellent repair results. It has been specially developed to adapt flexibly to different temperature conditions and various types of stone chip damage.The MegaVac's dual injector enables rapid switching between high vacuum and positive pressure. This efficiently draws and pushes the repair adhesive into the cracks to ensure an optimal repair.• Kit with resin for approx. 200-250 repairs• Repair time approx. 5-10 minutesScope of delivery 1 x 848100 Injector | MegaVac1 x 848101 Stand | MegaVac1 x 848137 UV torch | MegaVac1 x 848105 Pro Seal Lube | 5 ml | MegaVac1 x 848109 Pro2010 | 15 ml | MegaVac1 x 848111 Pitfiller | 15 ml | MegaVac1 x 848104 Pitpolish | 30 ml | MegaVac1 x 848103 Polishing Cork | MegaVac1 x 848118 Flexstick | MegaVac1 x 848107 Mirror | MegaVac2 x 848128 Gasket set | MegaVac | PU: 3 pcs.1 x 848106 Pro Filmtabs | MegaVac | PU: 10 pcs.1 x 848117 Scraper blade | MegaVac | PU: 10 pcs.1 x 848136 Flash drive | MegaVac1 x Case
Roll Out 2004 | Windshield removal system
Item no: 842010
The car glass removal system is designed for bonded vehicle windows and can be operated easily by just one person, ensuring reliable protection for the paintwork—eliminating the need for touch-ups. It operates precisely and safely, even with minimal tolerances between the glass and the bodywork. The system does not require any power sources or batteries, offering excellent handling, low costs, and the advantage of not needing additional tools.Scope of delivery1 × 848005 Winch with suction cups | 1 spool | Ø 120 mm1 × 848039 Winch with suction cups | 2 spools | Ø 120 mm1 × 848042 Tool bag | Roll Out 2000 | red1 × 848027 Ratchet with ball handle | 3/8"1 × 848007 Parabolic chisel1 × 848038 Extension piece for ratchet | 75 mm1 × 848001 Wire Insertion tool | Roll Out 20001 × 848029 Mounting wedges | 2-piece set1 × 848004 Wire needles 8 + 2 | 10-piece set1 × 848032 Safety goggles1 × Cutting wire | Ø 0.75 mm x 350 m1 × Interior protectors | 2-piece set1 × Protective gloves1 × Repair manual1 × Transport case
Body shop manager
Item no: 881100
Our mobile storage system, the Workshop Manager Classic, offers a space-saving storage solution for your workshop equipment. Compared to similar products, it even offers 30% more storage space. The shelves are made of heat-treated hard steel and ensure robust and durable use. The 4 industry-standard swivel castors, which are fully lockable, make it easy to move and secure the mobile workshop storage unit. The powder coating not only ensures a long-lasting good appearance, but also provides additional protection against damage. If required, the Workshop Manager Classic can be folded up in seconds to save space. In addition, several units can be pushed into each other to save even more space.Scope of delivery1 x Workshop Manager Classic2 x 881180 VAS 6760/1 Additional arms | 2 pc.2 x 881181 VAS 6760/2 Foam padding for additional arm | 2 pc.1 x WM-Plus
Roll Out 2020 CF | Windshield removal system
Item no: 842020
The glass removal system for bonded vehicle windows can be easily operated by a single person and reliably protects the paint, eliminating the need for rework. Even with minimal tolerance between the glass and the body, the system operates precisely and safely. It does not require a power source or batteries and is characterized by lightweight handling, low costs, and the advantage that no additional tools are necessary.Additionally, the Roll Out 2020 CF (Constant Friction) is an innovative advancement of the proven Roll Out 2000 glass removal system. The Constant Friction function simplifies repairs and makes the removal of vehicle windows more process-secure by significantly minimizing the risk of the cutting wire or Kevlar cord breaking.Scope of delivery 1 × 848088 Winch CF with suction cups | 120 mm & 150 mm1 × 848007 Parabolic chisel1 × 848090 Wire Insertion tool | Roll Out 2020CF1 × 848027 Ratchet with ball handle | 3/8"1 × 848087 Ratchet | small1 × 848038 Extension piece for ratchet | 75 mm1 × 848029 Mounting wedges | 2-piece set1 × 848004 Wire needles 8 + 2 | 10-piece set1 × 848032 Safety goggles1 × 848042 Tool bag | Roll Out 2000 | red1 × 848085 Kevlar Cord CF | PU: 25 m1 × Cutting wire | Ø 0.75 mm x 350 m1 × Interior protector1 × Protective gloves1 × Repair manual1 × Transport case
Winch with suction cups | 2 spools | Ø 150 mm
Item no: 848041
Double-spool winch with 150 mm diameter suction cups for Roll Out 2004.
JIGS | adapter set | new version
Item no: 851026NV
7-piece adapter set with extension bits for different engine and gearbox height settings. This ensures that service and maintenance work can be carried out reliably.Maximum load capacity: 600 kg with 7 holders/adaptersNote: The relevant OEM workshop specifications/repair guidelines must be observed when using this tool.
Winch CF with suction cups | 120 mm & 150 mm
Item no: 848088
Double-spool winch with the ‘Constant Friction’ function with suction cups of 120 and 150 mm diameter for the Roll Out 2020 CF.
Winch with suction cups | 2 spools | Ø 120 mm
Item no: 848039
Double-spool winch with 120 mm diameter suction cups for Roll Out 2004.
Winch with suction cups | 1 spool | Ø 150 mm
Item no: 848040
Single-spool winch with 150 mm diameter suction cups for Roll Out 2004.
Stand Up Storage Tower | Roll Out 2000
Item no: 848073
bestehend aus:10-RH-54 FiltHylsa 15mmCirclip-RS 781410-RH-55 Spole
Winch with suction cups | 1 spool | Ø 120 mm
Item no: 848005
Single-spool winch with 120 mm diameter suction cups for Roll Out 2004.
Upgrade kit for Roll Out model 2004
Item no: 848084
The upgrade kit includes the innovative, double-spool winch with ‘Constant Friction’ function and the small ratchet. Roll Out 2004 systems can therefore be easily and cost-effectively upgraded to the latest technical standard.
WS Roller-Spinner | 4/5 + centering rings
Item no: HV163
One wheel, three functions!Discover the WS Roller-Spinner, the ultimate solution for effortless maneuvering of discharged, blocked, or parked vehicles, regardless of their drive or braking systems. Its rotating inner ring makes it easy to recover electric vehicles or vehicles with automatic transmission. In this spinning wheel mode, the vehicle may only be pushed and the maximum speed must not exceed 3 km/h.As a universal spare wheel in rolling wheel mode, it avoids blocked lifts and enables easy movement of vehicles at a maximum speed of 8 km/h.For paint shops, the WS Roller-Spinner is a game-changer, offering seamless solutions to storage, logistics, and handling of paint wheels, doubling up as a paint wheel itself. Its adaptability makes it the perfect complement to traditional maneuvering aids, particularly on challenging surfaces like paving or gravel.Discover the advantages:Solid, one-piece cast construction prevents tire disintegration40% lighter than standard steel wheels, enhancing ease of handlingFeaturing a robust 10 mm steel core and universal rim hole pattern, perfect for impact wrenches and preventing over-spinningCompatibility:Please ensure the bolt circle matches before installation.High-quality hub centring rings in various sizes are available for WS Roller-Spinner 4/5 with a centre bore (CB) of 74.1 mm. Made from corrosion-resistant polycarbonate plastic, the rings are used to reduce or eliminate vibrations and at the same time make it easier to fit the wheels.Colour code of wheel hub diameter 52.1 mm | white 54.1 mm | light grey 56.1 mm | dark grey 56.6 mm | light blue 57.1 mm | blue 58.1 mm | dark blue 58.6 mm | light green 59.1 mm | green 59.6 mm | dark green 60.1 mm | pink 63.4 mm | red 64.1 mm | dark red 65.1 mm | light yellow 66.2 mm | yellow 66.6 mm | orange 67.1 mm | beige 70.1 mm | brown 71.6 mm | dark brown 72.6 mm | purple 70.3 mm | green
WS Roller-Spinner | 4/5 | Ø 22" × 2,5"
Item no: HV150
One wheel, three functions!Discover the WS Roller-Spinner, the ultimate solution for effortless maneuvering of discharged, blocked, or parked vehicles, regardless of their drive or braking systems. Its rotating inner ring makes it easy to recover electric vehicles or vehicles with automatic transmission. In this spinning wheel mode, the vehicle may only be pushed and the maximum speed must not exceed 3 km/h.As a universal spare wheel in rolling wheel mode, it avoids blocked lifts and enables easy movement of vehicles at a maximum speed of 8 km/h.For paint shops, the WS Roller-Spinner is a game-changer, offering seamless solutions to storage, logistics, and handling of paint wheels, doubling up as a paint wheel itself. Its adaptability makes it the perfect complement to traditional maneuvering aids, particularly on challenging surfaces like paving or gravel.Discover the advantages:Solid, one-piece cast construction prevents tire disintegration40% lighter than standard steel wheels, enhancing ease of handlingFeaturing a robust 10 mm steel core and universal rim hole pattern, perfect for impact wrenches and preventing over-spinningCompatibility:Please ensure the bolt circle matches before installation.
WS Roller-Spinner | 5/6 | Ø 22" × 2,5"
Item no: HV152
One wheel, three functions!Discover the WS Roller-Spinner, the ultimate solution for effortless maneuvering of discharged, blocked, or parked vehicles, regardless of their drive or braking systems. Its rotating inner ring makes it easy to recover electric vehicles or vehicles with automatic transmission. In this spinning wheel mode, the vehicle may only be pushed and the maximum speed must not exceed 3 km/h.As a universal spare wheel in rolling wheel mode, it avoids blocked lifts and enables easy movement of vehicles at a maximum speed of 8 km/h.For paint shops, the WS Roller-Spinner is a game-changer, offering seamless solutions to storage, logistics, and handling of paint wheels, doubling up as a paint wheel itself. Its adaptability makes it the perfect complement to traditional maneuvering aids, particularly on challenging surfaces like paving or gravel.Discover the advantages:Solid, one-piece cast construction prevents tire disintegration40% lighter than standard steel wheels, enhancing ease of handlingFeaturing a robust 10 mm steel core and universal rim hole pattern, perfect for impact wrenches and preventing over-spinningCompatibility:Please ensure the bolt circle matches before installation.
Door hinge adjusting tool | universal
Item no: 511302
This high-quality alignment tool provides the ideal method for adjusting welded door hinges. With a simple hand movement, the device effortlessly surrounds the hinge, and the integrated adjustment mechanism ensures a precise and play-free connection between the hinge strap and the tool. This allows for easy alignment of the hinge in all directions.
Winch | without suction cups | 2 spools
Item no: 848048
Double-spool winch without suction cups for Roll Out 2004.
Trolley for WS Roller-Spinner | large
Item no: HV160
Large trolley for storing 8 WS Roller-Spinners.
Infrared thermometer
Item no: 801150
By using the infrared thermometer, surface temperatures can be measured non-contact and efficiently. The pistol design facilitates handling, while the integrated processor ensures accurate measurement results.
Unwinder for cutting wire
Item no: 848006
The unwinder for cutting wire ensures safe and protected storage of the wire and enables easy unrolling and precise measuring of the length.
Winch | without suction cups | 1 spool
Item no: 848053
Single-spool winch without suction cups for Roll Out 2004.
Corner extender | 245 mm
Item no: 848081
Optimises the cutting angle and is ideal for large or particularly demanding windscreens.Two suction cups are required for use.
Trolley for WS Roller-Spinner | small
Item no: HV161
Small trolley for storing 4 WS Roller-Spinners.
WDT-250 Water Drainage Cleaning Tool
Item no: 801110
The cleaning device WDT-250 has been specifically designed to effectively clean the water drains on the sunroof. It enables easy removal of debris such as leaves or other residues, preventing potential water damage inside the vehicle. Commercially available cordless drills can be used to power the device. The built-in flocked cleaning shaft is equipped with a protective cap, allowing the cleaning of the roof drain channel even in consecutive tight radii. Note: Delivery does not include a cordless drill.
Cutting wire | 0.75 mm × 1300 m
Item no: 842015
The special cutting wire for the Roll Out 2000 windshield removal system has a length of 1300 m and is sufficient for approx. 215 windshields.
Fix magnets | 4-piece set
Item no: 882055
Enabling effortless fixing of attachments and protective mats. An indispensable tool for any bodywork station. Lieferumfang 4 x 881340 Replacement magnet for fix magnets4 x 881341 Handle for Fix Magnets & C-Arms | red
