Plasma Cutter WS 40-i | 110 V | Two-phase
Item no: 171006
The latest generation of inverter plasma technology provides high-performance control, ensuring a stable arc for smooth and precise cutting surfaces. Additionally, this technology enables effortless "perforated sheet cutting" – the arc remains stable even in sheet gaps, holes, and similar structures. The reduction of ignition energy to approximately 50% compared to other models not only leads to lower energy costs but also extends the lifespan of power nozzles, cutting caps, and torches.Thanks to a special programme, cutting is even possible on surfaces that are dirty or covered with paint residue. Sheet metal up to a thickness of 6 mm can be cut without any problems, while sheet metal up to a thickness of 8 mm can be cut in rough cut mode.Scope of delivery:1 x Plasma Cutter WS 40-i1 x 174004 Torch kit S25 | WS 40-i1 x 174016 Ground cable | WS 40-i1 x Operating instructions (multilingual)
Plasma Cutter WS 40-i | 230 V | Single Phase
Item no: 171005
The latest generation of inverter plasma technology provides high-performance control, ensuring a stable arc for smooth and precise cutting surfaces. Additionally, this technology enables effortless "perforated sheet cutting" – the arc remains stable even in sheet gaps, holes, and similar structures. The reduction of ignition energy to approximately 50% compared to other models not only leads to lower energy costs but also extends the lifespan of power nozzles, cutting caps, and torches.Thanks to a special programme, cutting is even possible on surfaces that are dirty or covered with paint residue. Sheet metal up to a thickness of 6 mm can be cut without any problems, while sheet metal up to a thickness of 8 mm can be cut in rough cut mode.Scope of delivery:1 x Plasma Cutter WS 40-i1 x 174004 Torch kit S25 | WS 40-i1 x 174016 Ground cable | WS 40-i1 x Operating instructions (multilingual)
Air Body File WPF 3000
Item no: 120040
The pneumatic file is highly slender, providing enhanced accessibility. The stroke frequency can be increased from 12,000 to up to 20,000 strokes per minute by adjusting the stroke length. Thanks to its high frequency, the file operates very smoothly, making it particularly suitable for deburring. Additionally, it can be used as a jigsaw and is well-suited for automotive body construction due to the option to reduce the stroke to 4 mm.Scope of delivery:1 x Air body file WPF 30001 x Compressed air hose with connector1 x Assembly tool1 x Transport case1 x Operating instructions (multilingual)
Air Body Saw WPS 4000 LV
Item no: 120060
The WPS 4000 LV - Your solution for demanding tasks! This body saw is specifically engineered to process extremely tough and resilient materials, suitable for USIBOR, BTR, TRIP, ZSTE, Aluminum, Cast Iron, and more. The WPS 4000 LV stands out with its vibration-reduced drive (only 3.5 m/s²), delivering immense power and performance even in the face of the most challenging tasks. Simultaneously, it remains ergonomic and versatile.Saw blade M42 | 10 tpi | 100 mm: Designed for AluminumSaw blade MPM | 18 tpi | 100 mm: Designed for High Strength SteelSaw blade TCT | 18 tpi | 90 mm: Designed for Ultra High Strength SteelScope of delivery 1 x Air Body Saw WPS 4000 LV1 x Saw blade M42 | 10 tpi | 100 mm1 x Saw blade MPM | 18 tpi | 100 mm1 x Saw blade TCT | 18 tpi | 90 mm1 x Compressed air hose with air connection1 x Assembly tool1 x Transport case1 x Instruction manual (multilingual)
MEC 600 Metal Edge Cutter | Full set with case
Item no: 640080
The pneumatic metal edge cutter MEC 600 has been developed for separating weld seams and for the secure and precise removal of the outer body skin. With two different cutting depths for aluminum and steel sheets, it ensures that only as much material is milled off at the wheel arch as necessary for the respective material, without damaging the inner sheet. The adjustable guide of the milling cutter allows for quick and easy adjustment of the MEC 600 to different angular positions of the body panels, while preserving the underlying sheet structure. Additional advantages • Innovative HM special cutters for steel and aluminum• High application safety when breaking laser weld seams (plasma torch seam)• No sparks when used with cutting oil (BTR Fluid)• No pre-heat treatment required on the bodyScope of delivery 1 x Milling device1 x 640053 Machine attachment V2 | MEC 6001 x 640057 Locking nut | MEC 6001 x 640063 HM Flat head cutter | LongLife1 x 640052 Adjustment gauge V2 | MEC 6001 x 640051 Finger guard | MEC 6001x Assembling tool1x Instruction manual
Air Body Saw WPS 3000
Item no: 120030
The WPS 3000 is a handy, powerful and quiet professional body saw. Due to the remarkably low vibrations of 2.5 m/s² according to ISO 8662, the noise of the saw is reduced to a minimum and the device is designed for continuous operation. The WPS 3000 also fulfils the health and safety standards of the employers' liability insurance association.A long stroke of 10 mm results in perfect cutting performance and a reduced sound pressure level of 77.4 dB(A) (according to ISO 15744).Saw blade | bi-metal | 14 tpi: For wood, aluminium, composite materials and plasticSaw blade | bi-metal | 18 tpi: For tight radii, work on the dashboardSaw blade | bi-metal | 24 tpi: For sheet metal combinations up to 4 mmSaw blade | bi-metal | 28 tpi: For "hybrid materials" (aluminium-steel-GRP)Saw blade | bi-metal | 32 tpi: For thin sheet metal and high-strength steels up to 1 mmScope of delivery:1 x Air Body Saw WPS 30001 x Compressed air hose with connector1 x Saw blade | bi-metal | 14 tpi1 x Saw blade | bi-metal | 18 tpi1 x Saw blade | bi-metal | 24 tpi (mounted)1 x Saw blade | bi-metal | 28 tpi1 x Saw blade | bi-metal | 32 tpi1 x Assembly tool1 x Transport case1 x Instruction manual (multilingual)
Air Body Saw WPS 2000
Item no: 120010
The WPS 2000 is an all-rounder saw for bodywork. It is designed for daily cutting and separating tasks and offers highest quality and maximum service life through special bi-metal saw blades and ensures absolutely burr-free cutting with 12,000 strokes per minute.Saw blade | bi-metal | 14 tpi: For wood, aluminum, composites and plastics.Saw blade | bi-metal | 18 tpi: For tight radii, work on the dashboardSaw blade | bi-metal | 24 tpi: For sheet combinations up to 4 mmSaw blade | bi-metal | 28 tpi: For so-called hybrid materials (aluminum-steel-GFRP) Saw blade | bi-metal | 32 tpi: For thin sheet and high-strength steels up to 1 mmScope of delivery:1 x Air Body Saw WPS 20001 x Compressed air hose with air connection1 x Saw blade | bi-metal | 14 tpi1 x Saw blade | bi-metal | 18 tpi1 x Saw blade | bi-metal | 24 tpi (mounted)1 x Saw blade | bi-metal | 28 tpi1 x Saw blade | bi-metal | 32 tpi1 x Mounting tool1 x Carrying case1 x Instruction manual (multilingual)
VarioDrill WS 90 with Jumbomatic
Item no: 601009
The pneumatic spot weld remover VarioDrill WS 90 with Jumbomatic has been specifically designed for universal use in all vehicles. It is particularly suitable for expansive and deep profiles. Its functions enable the reliable removal and opening of spot welds along the seam as well as in hard-to-reach areas inside the vehicle. Thanks to the precise adjustability of the milling depth and the depth stop, the underlying sheet metal is effectively protected from damage. Scope of delivery 1 x 602001 VarioDrill WS 90 without Variomatic1 x 608018 Jumbomatic WS 901 x 620200 Variantic cutter Z3 | 44 mm | Ø 8.0 mm1 x 604108 Allen key SW21 x Transport case
VarioDrill WS 90 with Variomatic
Item no: 601001
The pneumatic spot weld remover VarioDrill WS 90 with Variomatic has been developed for universal use in all vehicles. It efficiently removes and opens spot welds on both flanges and in internal areas. The 360° rotatable Variomatic handle reliably prevents slipping, while the depth stop protects the underlying sheet metal from damage. Additionally, the handle can be removed within seconds without the need for additional tools.Advantages • Effortless operation• Precise• Milling depth continuously adjustable• Easy and quick assembly• With depth stop• Suitable for high-strength and ultra-high-strength sheets• Long lifespanScope of delivery 1 x 602001 VarioDrill WS 90 without Variomatic1 x 608020 Variomatic WS 90 | 900 U/min.1 x 620200 Variantic cutter Z3 | 44 mm | Ø 8.0 mm1 x Transport case1 x Allen key
LaserCutter LC 04 | Full set with case
Item no: 640000
The LaserCutter LC 04 is specifically designed for processing laser weld seams and laser solder seams. The specially developed cutting wheel is made of special hard metal and features an innovative duplex grind to ensure precise milling. Due to its compact design, the LC 04 is easy to handle and allows good accessibility, even in tight spaces. With a selectable cutting depth limit of either 0.8 or 1.0 mm, the LaserCutter is ideal for protecting against potential milling damage and providing safety. Additionally, it is characterized by its very precise concentricity, further optimizing the quality and precision of the milling process.Scope of delivery 1 x 631003 Angle grinder LC 041 x 640005 Mandrel | Cutting depth: 0.8 mm | Ø 25 mm1 x 640010 Mandrel | Cutting depth: 1.0 mm | Ø 25 mm1 x 640025 Cutting wheel no. 1 | Ø 25 × 4 mm1 x 648000 Protection cover for cutting wheel | 25 mm1 x 648010 Clamping ring aluminium | LC 041 x 648015 Guide arm | LC 042 x 648020 Allen key | 3 mm | LC 041 x 648007 BTR/BOR Fluid | 50 ml1 x Transport case
VarioDrill WS 90 without Variomatic
Item no: 602001
VarioDrill WS 90 without Variomatic.Scope of delivery 1 x 602001 VarioDrill WS 90 without Variomatic1 x 620200 Variantic cutter Z3 | 44 mm | Ø 8.0 mm1 x 604108 Allen key SW21 x Transport case
Special crown cutter | Ø 14 mm
Item no: 607101
Special crown cutter for use with the Spot Weld Remover VarioDrill WS 90. Scope of delivery 1 x Cutting head with mandrel1 x Spring including holder3 x 607110 Spare crown type N
Extension set LC 04 | Ø 40 mm
Item no: 642000
Extension set for LaserCutter LC 04.Scope of delivery 1 x Cutting wheel no. 2 | Ø 40 × 4 mm1 x 640015 Mandrel | cutting depth: 0.8 mm | Ø 40 mm1 x 640020 Mandrel | cutting depth: 1.0 mm | Ø 40 mm1 x 648005 Protection cover for cutting wheel | Ø 40 mm
BTR/BOR cutter Z3 | 44 mm | 7-piece set
Item no: 620116
Cutter set for removing spot welds with the VarioDrill WS 90.Scope of delivery 2 x 620000 BTR/BOR cutter Z3 | 44 mm | Ø 6.0 mm2 x 620001 BTR/BOR cutter Z3 | 44 mm | Ø 8.0 mm2 x 620006 BTR/BOR cutter Z3 | 44 mm | Ø 10.0 mm1 x 628005 Center punch with centering aid | Ø 8 × 70 mm | UHSS
Angle grinder FX-8125 LA
Item no: 611135
Ideal for grinding, brushing, polishing, and rust removal tasks in automotive body repair.
Pistol grinder 19286-S 317 | 5"
Item no: 611124
Pneumatic pistol grinder for sanding pads with a diameter of 127 mm.
Belt sander 457 | pneumatic
Item no: 671002
The belt sander 457 is ideally suited for the final finishing of bodywork surfaces and particularly unleashes its full potential on narrow areas. Thanks to its stepless speed control, the sanding speed can be freely adjusted as needed by raising or lowering the lever. For releasing and separating: • Weld spots (Usibor, BTR-BOR, etc.) • Weld seams (MIG-MAG, etc.) • Laser weld seams Note: Releasing and separating weld spots, weld seams, and laser weld seams only in conjunction with the premium sanding belts K36, K60 a nd K80.
Special drill bit BWZ 100 | Ø 6.7 × 48/11 mm
Item no: 620050
Special drill bit for Mercedes rivet process preparations with the drilling tool BWZ 100.
Jumbomatic DC-version
Item no: 608019
Only usable in combination with the special crown cutter for milling self piercing rivets and blind rivets.Note: Delivery does not include special crown cutter and VarioDrill WS 90.
Cutting wheel no. 2 | Ø 40 × 4 mm
Item no: 640030
Specially designed cutting wheel with a diameter of 40 mm, a thickness of 4 mm, and a duplex grind. It is crafted from special hard metal and ensures precise milling.
Sanding disc set | Ø 90 mm | K40, K60, K80, K120
Item no: 667017
Sanding disc set suitable for use with the eccentric sander Rotex RO 90 DX.
Countersink 100° | with depth stop and pilot
Item no: 617241
100° countersink with depth stop and pilot for precise countersinking of holes when using screws and rivets.
MULTI-STEP drill bit set | 25 pieces
Item no: 637008
The multi step drill feature a step-structured tip geometry with up to 6 steps for precise, circular drilling. The drill tip has a 118° point angle combined with an optimized, sharp-edged cross grinding to ensure precise centering and easy cutting. The drills are ideally suited for use in hand drills. Their 3-flat shank ensures a stable positioning in the chuck and prevents unintentional slipping during the drilling process. Ø range: 1.0 - 13.0 mmPitch: 0.5 mm
Starter Set MEC 600 | 5-piece
Item no: 640081
The starter set expands the range of applications of the MEC 600 edge milling cutter in the standard version and increases the service life of the cutters with suitable cutting materials.Laser welding seams can be cut with the round head cutter and aluminium can be machined with the ALU flat head cutter. The DrillWax serves as a lubricant for the ALU milling cutter to optimise the application result and increase the service life of the milling cutter. The cutting oil should be used in every milling application on steel bodies as part of the repair process. The finger guard must be fitted in the centre of the machine attachment when used on the face side, to cover the cutter in the side window and protect the fingers from possible injury.Scope of delivery 1 x 640069 HM Round head cutter for LWS | LongLife1 x 640062 HM Flat head cutter for ALU1 x 640051 Finger guard | MEC 6001 x 640068 Drill wax stick | MEC 6001 x 628000 BTR/BOR Fluid | 125 ml
Countersink 120° | with depth stop and pilot
Item no: 617240
120° countersink with depth stop and pilot for precise countersinking of holes when using screws and rivets.
BTR/BOR starter set | 4 cutters, fluid, punch
Item no: 622003
BTR/BOR starter set.Scope of delivery 1 x 620001 BTR/BOR cutter Z3 | 44 mm | Ø 8.0 mm3 x 620200 Variantic cutter Z3 | 44 mm | Ø 8.0 mm1 x 628005 Center punch with centering aid | Ø 8 × 70 mm | UHSS1 x 628000 BTR/BOR Fluid | 125 ml
Variant item
Variantic cutter Z3 | 44 mm | Ø 8.0 mm | 5 pcs.
Item no: 620205
Variantic cutter Z3 for removing spot welds with the VarioDrill WS 90.
UHSS/AluCut side milling cutter set
Item no: 637117
The AluCut side milling cutter set is ideally suited for milling hard and ultra-high-strength-steel materials, such as Usibor. Thanks to its special gearing, it allows for extremely precise removal of weld seams. The set also features a special attachment with a 'driver' for secure application. It is compatible with all common straight and angle grinders that have a 6 mm diameter mandrel.Scope of delivery2 x 637115 UHSS/AluCut side milling cutter | Ø 40 × 4.4 mm1 x 637116 Mandrel for AluCut | Ø 6 mm
Belt sander 330 | pneumatic
Item no: 671001
The pneumatic belt sander 330 is ideal for narrow surfaces. It operates with stepless speed regulation and is specifically designed for sanding belts with dimensions of 10 x 330 mm. It features a quick belt change system and automatic belt adjustment.
Variomatic WS 90 | 900 U/min.
Item no: 608020
The Variomatic provides the flexibility of a 360° rotation according to requirements. The safety fixation system ensures that the cutter remains securely in place during the working process. An outstanding advantage is that the Variomatic does not impact the limitation of milling depth. Additionally, it is crafted from high-quality aluminum die-casting, thereby exhibiting exceptional torsional rigidity.
Drilling machine GTC-041B
Item no: 611122
Pneumatic drill with forward/reverse function and quick-release chuck.
Chain tube cutter | Tube-Ø: 15-75 mm
Item no: 561025
The chain tube cutter made of special steel is ideal for cutting tubes with a diameter ranging from 15 mm to 75 mm and a wall thickness of 2.5 mm. Easy readjustment during the cutting process is possible due to its large wing screw.
Cutting disc INOX | 125 × 0.8 mm | PU: 25 pcs.
Item no: 637052
The cutting disc for stainless steel (INOX) with a disc width of 0.8 mm is suitable for the fastest, cool, and particularly thin and burr-free cuts. Its ergonomic design ensures comfort and the highest safety during use.
Clamping ring aluminium | LC 04
Item no: 648010
Clamping ring made of aluminium for the protection covers for cutting wheels LC 04.
Solid carbide burr for ALU | big cone shape
Item no: 637012
Solid carbide burr in conical shape with a round head for post-processing ALU weld seams.
MULTI-STEP drill bit set | 19 pieces
Item no: 637007
The multi step drill feature a step-structured tip geometry with up to 6 steps for precise, circular drilling. The drill tip has a 118° point angle combined with an optimized, sharp-edged cross grinding to ensure precise centering and easy cutting. The drills are ideally suited for use in hand drills. Their 3-flat shank ensures a stable positioning in the chuck and prevents unintentional slipping during the drilling process. Ø range: 1.0 - 10.0 mmPitch: 0.5 mm
Solid carbide burr for ALU | cylinder dome shape
Item no: 637010
Solid carbide burr with a cylindrical dome-shaped head for post-processing ALU weld seams.
Cutting wheel no. 1 | Ø 25 × 4 mm
Item no: 640025
Specially designed cutting wheel with a diameter of 25 mm, a thickness of 4 mm, and a duplex grind. It is crafted from special hard metal and ensures precise milling.
Sheet metal shear | right
Item no: 531101
Sheet metal shear made of tool steel with right-cutting function and adjustable, screw-secured joint.