PRODUCTS

Air Body Saw WPS 2000

Item no: 120010

The WPS 2000 is an all-rounder saw for bodywork. It is designed for daily cutting and separating tasks and offers highest quality and maximum service life through special bi-metal saw blades and ensures absolutely burr-free cutting with 12,000 strokes per minute.Saw blade | bi-metal | 14 tpi: For wood, aluminum, composites and plastics.Saw blade | bi-metal | 18 tpi: For tight radii, work on the dashboardSaw blade | bi-metal | 24 tpi: For sheet combinations up to 4 mmSaw blade | bi-metal | 28 tpi: For so-called hybrid materials (aluminum-steel-GFRP) Saw blade | bi-metal | 32 tpi: For thin sheet and high-strength steels up to 1 mmScope of delivery:1 x Air Body Saw WPS 20001 x Compressed air hose with air connection1 x Saw blade | bi-metal | 14 tpi1 x Saw blade | bi-metal | 18 tpi1 x Saw blade | bi-metal | 24 tpi (mounted)1 x Saw blade | bi-metal | 28 tpi1 x Saw blade | bi-metal | 32 tpi1 x Mounting tool1 x Carrying case1 x Instruction manual (multilingual)

Air Body Saw WPS 3000

Item no: 120030

The WPS 3000 is a handy, powerful and quiet professional body saw. Due to the remarkably low vibrations of 2.5 m/s² according to ISO 8662, the noise of the saw is reduced to a minimum and the device is designed for continuous operation. The WPS 3000 also fulfils the health and safety standards of the employers' liability insurance association.A long stroke of 10 mm results in perfect cutting performance and a reduced sound pressure level of 77.4 dB(A) (according to ISO 15744).Saw blade | bi-metal | 14 tpi: For wood, aluminium, composite materials and plasticSaw blade | bi-metal | 18 tpi: For tight radii, work on the dashboardSaw blade | bi-metal | 24 tpi: For sheet metal combinations up to 4 mmSaw blade | bi-metal | 28 tpi: For "hybrid materials" (aluminium-steel-GRP)Saw blade | bi-metal | 32 tpi: For thin sheet metal and high-strength steels up to 1 mmScope of delivery:1 x Air Body Saw WPS 30001 x Compressed air hose with connector1 x Saw blade | bi-metal | 14 tpi1 x Saw blade | bi-metal | 18 tpi1 x Saw blade | bi-metal | 24 tpi (mounted)1 x Saw blade | bi-metal | 28 tpi1 x Saw blade | bi-metal | 32 tpi1 x Assembly tool1 x Transport case1 x Instruction manual (multilingual)

Air Body File WPF 3000

Item no: 120040

The pneumatic file is highly slender, providing enhanced accessibility. The stroke frequency can be increased from 12,000 to up to 20,000 strokes per minute by adjusting the stroke length. Thanks to its high frequency, the file operates very smoothly, making it particularly suitable for deburring. Additionally, it can be used as a jigsaw and is well-suited for automotive body construction due to the option to reduce the stroke to 4 mm.Scope of delivery:1 x Air body file WPF 30001 x Compressed air hose with connector1 x Assembly tool1 x Transport case1 x Operating instructions (multilingual)

Air Body Saw WPS 4000 LV

Item no: 120060

The WPS 4000 LV - Your solution for demanding tasks! This body saw is specifically engineered to process extremely tough and resilient materials, suitable for USIBOR, BTR, TRIP, ZSTE, Aluminum, Cast Iron, and more. The WPS 4000 LV stands out with its vibration-reduced drive (only 3.5 m/s²), delivering immense power and performance even in the face of the most challenging tasks. Simultaneously, it remains ergonomic and versatile.Saw blade M42 | 10 tpi | 100 mm: Designed for AluminumSaw blade MPM | 18 tpi | 100 mm: Designed for High Strength SteelSaw blade TCT | 18 tpi | 90 mm: Designed for Ultra High Strength SteelScope of delivery 1 x Air Body Saw WPS 4000 LV1 x Saw blade M42 | 10 tpi | 100 mm1 x Saw blade MPM | 18 tpi | 100 mm1 x Saw blade TCT | 18 tpi | 90 mm1 x Compressed air hose with air connection1 x Assembly tool1 x Transport case1 x Instruction manual (multilingual)

Tool Holder Clamp | without screw

Item no: 124024

For all saws in the series: WPS 3000 | WPS 2000 | WPF 3000 | PS 1 | PLF 90 | PLF 80 | DKS 100 | PS 8

Tool holder | grey

Item no: 124027

For all saws in the series: WPS 3000 | WPS 2000 | WPF 3000| PS 1 | PLF 90 | PLF 80 | DKS 100 | PS 8

Finger guard | WPS 2000

Item no: 124028

For all saws and files in the series: WPS 3000 | WPS 2000 | WPF 3000

Counter holder | WPS 2000

Item no: 124029

For all saws in the series: WPS 2000

Round-head screw | M5 × 8 mm

Item no: 124030

For all saws and files in the series: WPS 3000 | WPS 2000 | WPF 3000

Set screw | Counter holder WPS 2000

Item no: 124032

For all saws in the series: WPS 2000

Operating lever | WPS 2000

Item no: 124034

For all saws in the series: WPS 2000

Counter holder | WPS 3000

Item no: 124079

For all saws in the series: WPS 3000

Tool holder | red

Item no: 124127

For all saws in the series: WPS 4000

Plasma Cutter WS 40-i | 230 V | Single Phase

Item no: 171005

The latest generation of inverter plasma technology provides high-performance control, ensuring a stable arc for smooth and precise cutting surfaces. Additionally, this technology enables effortless "perforated sheet cutting" – the arc remains stable even in sheet gaps, holes, and similar structures. The reduction of ignition energy to approximately 50% compared to other models not only leads to lower energy costs but also extends the lifespan of power nozzles, cutting caps, and torches.Thanks to a special programme, cutting is even possible on surfaces that are dirty or covered with paint residue. Sheet metal up to a thickness of 6 mm can be cut without any problems, while sheet metal up to a thickness of 8 mm can be cut in rough cut mode.Scope of delivery:1 x Plasma Cutter WS 40-i1 x 174004 Torch kit S25 | WS 40-i1 x 174016 Ground cable | WS 40-i1 x Operating instructions (multilingual)

Plasma Cutter WS 40-i | 110 V | Two-phase

Item no: 171006

Torch kit S25 | WS 40-i

Item no: 174004

Torch kit S25 for WS 40-i.

Cutting electrode | WS 40-i | PU: 5 pcs.

Item no: 174010

Cutting electrode for WS 40-i.

Cutting nozzle | WS 40-i | PU: 5 pcs.

Item no: 174012

Cutting nozzle for WS 40-i.

Protective cap | WS 40-i

Item no: 174014

Protective cap for WS 40-i.

Insulating ring for cutting nozzle | WS 40-i

Item no: 174015

Insulating ring for cutting nozzle for WS 40-i.

Ground cable | WS 40-i

Item no: 174016

Ground cable for WS 40-i.

Torch roller guide | WS 40-i

Item no: 177008

Torch roller guide for WS 40-i.

Pressure reducing valve | 7 bar

Item no: 194000

Excessive operating pressure in pneumatic tools can lead to premature wear and damage. To counteract this problem, a pressure reducing valve is a cost-effective but important solution for every workshop. The valve prevents damage to the tools and thus ensures a longer service life.Recommended for all body saws.

Tool Holder Clamp

Item no: 194070

For all saws in the series: WPS 3000 | WPS 2000 | WPF 3000| PS 1 | PLF 90 | PLF 80 | DKS 100 | PS 8

Variant item

Saw blade | bi-metal | 14 tpi | 10 pcs.

Item no: 197000

For aluminum, wood, composite materials and GRP• High cutting performance• Burr-free cuts• High flexibility thanks to bi-metal• Very smooth running

Variant item

Saw blade M42 | 24 tpi | 80 mm | 3 pcs.

Item no: 197008

A premium saw blade designed for demanding requirements on longitudinal chassis beams in vehicle construction. The newly developed tooth geometry prevents rapid clogging of the cutting teeth and, in many cases, enables direct plunging into the sheet metal without prior drilling. The saw blade also facilitates straight-line cutting, thanks to the wide material that ensures increased stability during the cutting process.

Saw blade | diamond coating

Item no: 197010

The diamond-coated saw blade provides an advanced solution for cutting challenging composite materials such as GFRP, CFRP, Boron fabric weaves, and more, ensuring a precise and clean cut. The diamond coating allows the separation of materials that are no longer manageable using conventional methods.

Variant item

Saw blade MPM | 18 tpi | 130 mm

Item no: 197023

With our newly developed saw blade, created in collaboration with automotive manufacturers, all steels and alloys up to a hardness of 1000 MPa can be processed.To extend the blade life, the use of a suitable cutting additive is strongly recommended, particularly when cutting hard steels. Cutting oil is an excellent choice as it safeguards the saw blades from excessive heating, thereby preserving optimal cutting performance.

Variant item

Saw blade M42 | 10 tpi | 100 mm

Item no: 197025

In collaboration with automotive manufacturers, an innovative saw blade has been developed, specifically designed for aluminum casting, aluminum extrusions, multi-layer composites, high-strength, and extremely tough aluminum. The new tooth geometry prevents rapid clogging of the cutting teeth. To extend the blade life, the use of a suitable cutting additive is strongly recommended, particularly when cutting hard steels. Cutting oil is an excellent choice as it safeguards the saw blades from excessive heating, thereby preserving optimal cutting performance.

Saw blade TCT | 18 tpi | 90 mm

Item no: 197027

Optimized Saw Blade for Challenging Applications This saw blade is designed to deliver optimal cutting results even in the most challenging boundary conditions. It is excellently suited for processing all types of steels and alloys with a strength of up to 1800 MPa, including USIBOR, BORON, BTR, high-strength and ultra-high-strength steels, HLE, TTHLE, and more. When cutting, no hot sparks are generated, and the edge zones remain cool without altering the metal structure. To extend the blade life, the use of a suitable cutting additive is strongly recommended, particularly when cutting hard steels. Cutting oil is an excellent choice as it safeguards the saw blades from excessive heating, thereby preserving optimal cutting performance.

Saw blade TCT Plus | 90 mm

Item no: 197028

Improved cutting geometry for high-strength and ultra-high-strength body steels This saw blade is designed to deliver optimal cutting results even in the most challenging boundary conditions. It is excellently suited for processing all types of steels and alloys with a strength of up to 1800 MPa, including USIBOR, BORON, BTR, high-strength and ultra-high-strength steels, HLE, TTHLE, and more. When cutting, no hot sparks are generated, and the edge zones remain cool without altering the metal structure.To extend the blade life, the use of a suitable cutting additive is strongly recommended, particularly when cutting hard steels. Cutting oil is an excellent choice as it safeguards the saw blades from excessive heating, thereby preserving optimal cutting performance.

Washers | DIN 125 | Ø 8.4/16 mm | PU: 100 pcs.

Item no: 297009

The use of washers for welding allows for targeted straightening of vehicle parts. Utilizing a sliding hammer, the sheet metal is precisely worked on and restored to the desired shape.

Triangle dent pulling washers | PU: 15 pcs.

Item no: 297013

The use of Triangle dent pulling washers and a Quick pulling hammer allows for a quick and economical repair of vehicle parts. If necessary, burned or worn tips can be easily filed again.

Variant item

T-Pins | Ø 5 × 10.0 mm | 50 pcs.

Item no: 297033

T-pins for welding with copper-plated steel core.

Variant item

Welding studs | coarse thread | Ø 5 × 25 mm

Item no: 297054

Copper-plated coarse threaded bolts made of steel 4.8

Welding studs | M6 × 20 mm

Item no: 297062

Copper-plated weld-on studs with steel core.

Electrode for spot welding gun PSP | Ø 12/10 mm

Item no: 297106

Electrode for one-sided resistance spot welding

Carbon electrode | Ø 9.5 mm

Item no: 297107

Used for sheet metal upsetting and sheet metal drawing. It is compatible with single-sided spot-welding guns. Has a length of 305 mm.

Carbon electrode | Ø 10.0 mm

Item no: 297108

Used for sheet metal upsetting and sheet metal drawing. It is compatible with single-sided spot-welding guns. Has a length of 300 mm.

Welding steel sheet V2A

Item no: 297300

The welding plates measure 250 x 15 x 0.6 mm and are made of V2A (stainless steel). When spot welding thin aluminum sheets, they increase the welding resistance.